velocity 50 N2 Build Thread

[praztek]

Thank You !

[liamm =D]

I have a few questions / observations during my build. Thanks in advance.


Exhaust line from fuel tank, routing through frame hole, thinking of putting something to prevent chafing

i put a bit of heat shrink where it was touching the frame aslo i would sand it with a bit of wet and dry to get the sharp corners off

[Jamin_00]

I have to say with the Fusion somehow in the vbar software it's the best Heli (value wise) I have ever set up. Even the tail the 2 figures are exactly the same and I never had that before and all the other figures appear bang in the middle. I was not looking forward to it originally cos of bell cranks etc but pleasantly surprised by it so I would imagine hitting the sweet spot in the beastx software should be as good??

I do have a beastx here, if I get time before the maiden I can always plug my servos in and see how the set up goes?

[praztek]

Yeah, will def go back and sand that area, and possibly put some shoe goop around it , which should do the trick.

[del19_82]

Praztek i had the same issue with the throttle link, i have got it as close as i could get it and will take it from there.

[Gate88]

I have to say with the Fusion somehow in the vbar software it's the best Heli (value wise) I have ever set up. Even the tail the 2 figures are exactly the same and I never had that before and all the other figures appear bang in the middle. I was not looking forward to it originally cos of bell cranks etc but pleasantly surprised by it so I would imagine hitting the sweet spot in the beastx software should be as good??

I do have a beastx here, if I get time before the maiden I can always plug my servos in and see how the set up goes?

I'd just be interested to know if others are able to hit the 6 degree sweet spot with standard servo wheels but dont knock yourself out Ben, if its already set up on a V Bar its not worth interfering with it!

[waveydavey]

I'll do it tomorrow night Guy happy to try it out

[del19_82]

Guy when i set mine up I will see if i can get it right, i'm not using the standard servo wheels though, i'm using Futaba ones designed specifically for outrage heli's

[Gate88]

Guy when i set mine up I will see if i can get it right, i'm not using the standard servo wheels though, i'm using Futaba ones designed specifically for outrage heli's

Got a link?

[del19_82]

Got a link?

Hopefully Paul will have it mate, i got them off him

[del19_82]

Guy it's these ones here that i have.

Outrage RC , LLC

[LipolyGone]

I used four point Futaba star arms when I first set my beast x Up on the fusion guy & I had an altercation with the ground I then put on align plastic wheels & all is well

[Gate88]

I used four point Futaba star arms when I first set my beast x Up on the fusion guy & I had an altercation with the ground I then put on align plastic wheels & all is well

Yea sadly its the price of ann education!!!!

[LipolyGone]

Sure is mate & ya won't catch me using em on flybarless again thats for sure.

[squeaky pete]

nothing will beat a solid disc on fbl, i always use the mammoth huge futaba disc, the ones that hav a 19mm distance pre drilled, and i just drill my own holes, a disc is soooo much stronger than any horn purely coz its one piece, i cant flex or move at all

just my bit of advice