Announcement

Collapse
No announcement yet.

Vario Bell 47G 2 with Benzine Mechs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    hammerite for the pipe?
    PGK
    450Pro Clone fb, Trex500 fbl beastx, Trex 600N fbl beastx, Trex700N fbl msh brain, Spectra G Hanson 26 3dmax fb, Blitz Avro fb...Futaba 8FG

    Comment


    • #32
      Managed to get all the primer coats on and finished today.Next will be to finish off the rivet detail before applying the final colour.
      Also got some Halfords heat proof paint for the silencer.It's a bit bright but will dull down once the engines been run a few times.
      I have managed to get hold of a pilot that I hope fits which is a 1974 Action Man in heli pilot overalls.Hopefully he will look the part when my heli is ready for it's maiden.
      You might need your sunglasses for the last pic. :-)
      Attached Files
      Last edited by sparts; 31-01-2015, 09:52 PM.
      Hirobo Lama with Electric Conversion
      GraupnerMZ24 PRO





      Comment


      • #33
        i can't get the pic's to open

        action man should fit the vario 47
        my sky foxed 47's have them in, its nice and snug inside the cabin for them
        Hirobo Turbulence D3
        a bunch of bls servo's and a 701 gyro
        Powered by an OS91 hz and a MP2
        Winner of the LHC Scale Cup 2011

        1/4 scale Vario Bell 47 G3
        1/3 scale Vario R22
        2012 LHC Scale Cup Judge
        member of save the flybar foundation
        www.alcesterhelicopterclub.bmfa.org
        sigpic

        Comment


        • #34
          That muffler's been well and truly tangoed
          PGK
          450Pro Clone fb, Trex500 fbl beastx, Trex 600N fbl beastx, Trex700N fbl msh brain, Spectra G Hanson 26 3dmax fb, Blitz Avro fb...Futaba 8FG

          Comment


          • #35
            That colour is supposedly red,but on reading the reviews on the paint they all complained it was Orange so I thought I would give it a go and I was well pleased as it does look Orange.
            Hirobo Lama with Electric Conversion
            GraupnerMZ24 PRO





            Comment


            • #36
              here's one that was painted earlier


              tango.jpg
              Hirobo Turbulence D3
              a bunch of bls servo's and a 701 gyro
              Powered by an OS91 hz and a MP2
              Winner of the LHC Scale Cup 2011

              1/4 scale Vario Bell 47 G3
              1/3 scale Vario R22
              2012 LHC Scale Cup Judge
              member of save the flybar foundation
              www.alcesterhelicopterclub.bmfa.org
              sigpic

              Comment


              • #37
                He'll do nicely as my co-pilot. ;-)
                Hirobo Lama with Electric Conversion
                GraupnerMZ24 PRO





                Comment


                • #38
                  Started on the main colour now.
                  Only problem is with 1 large can only did one coat on the parts in the pics.
                  I need to raid my piggybank for more cans.
                  DSC00672.JPGDSC00673.JPGDSC00674.JPG
                  Hirobo Lama with Electric Conversion
                  GraupnerMZ24 PRO





                  Comment


                  • #39
                    looking gooooood
                    DX6I
                    blade 450x
                    Morley Bell 47g RNLI colours 1/9th scale
                    Morley bell 47g in a pearl purple and white

                    Comment


                    • #40
                      if you've painted the whole tail truss it will take a lot of paint as most of it is wasted painting fresh air
                      Hirobo Turbulence D3
                      a bunch of bls servo's and a 701 gyro
                      Powered by an OS91 hz and a MP2
                      Winner of the LHC Scale Cup 2011

                      1/4 scale Vario Bell 47 G3
                      1/3 scale Vario R22
                      2012 LHC Scale Cup Judge
                      member of save the flybar foundation
                      www.alcesterhelicopterclub.bmfa.org
                      sigpic

                      Comment


                      • #41
                        I've now painted a couple of coats on most of the orange parts now.
                        Waiting for them to fully dry then I need to wet and dry the stabs as they have a couple of runs in them and a couple of the other parts have the odd blemish so I'll do the same with them.
                        I will then give a final coat of paint before clear coating the lot.

                        DSC00675.JPGDSC00676.JPGDSC00677.JPGDSC00679.JPGDSC00681.JPGDSC00683.JPGDSC00685.JPGDSC00686.JPGDSC00687.JPGDSC00688.JPG
                        Hirobo Lama with Electric Conversion
                        GraupnerMZ24 PRO





                        Comment


                        • #42
                          can you tell me where you got the paint and what colour it is ?
                          as looks like the colour I am looking for to make up a RNLI heli
                          DX6I
                          blade 450x
                          Morley Bell 47g RNLI colours 1/9th scale
                          Morley bell 47g in a pearl purple and white

                          Comment


                          • #43
                            tango orange
                            Hirobo Turbulence D3
                            a bunch of bls servo's and a 701 gyro
                            Powered by an OS91 hz and a MP2
                            Winner of the LHC Scale Cup 2011

                            1/4 scale Vario Bell 47 G3
                            1/3 scale Vario R22
                            2012 LHC Scale Cup Judge
                            member of save the flybar foundation
                            www.alcesterhelicopterclub.bmfa.org
                            sigpic

                            Comment


                            • #44
                              Originally posted by goldslinger View Post
                              can you tell me where you got the paint and what colour it is ?
                              as looks like the colour I am looking for to make up a RNLI heli
                              I got the paint from Halfords,it's the VW Orange.
                              Hirobo Lama with Electric Conversion
                              GraupnerMZ24 PRO





                              Comment


                              • #45
                                thanks for the info
                                DX6I
                                blade 450x
                                Morley Bell 47g RNLI colours 1/9th scale
                                Morley bell 47g in a pearl purple and white

                                Comment

                                Working...
                                X