hammerite for the pipe?
Announcement
Collapse
No announcement yet.
Vario Bell 47G 2 with Benzine Mechs
Collapse
X
-
Managed to get all the primer coats on and finished today.Next will be to finish off the rivet detail before applying the final colour.
Also got some Halfords heat proof paint for the silencer.It's a bit bright but will dull down once the engines been run a few times.
I have managed to get hold of a pilot that I hope fits which is a 1974 Action Man in heli pilot overalls.Hopefully he will look the part when my heli is ready for it's maiden.
You might need your sunglasses for the last pic. :-)Last edited by sparts; 31-01-2015, 09:52 PM.Hirobo Lama with Electric Conversion
GraupnerMZ24 PRO
Comment
-
i can't get the pic's to open
action man should fit the vario 47
my sky foxed 47's have them in, its nice and snug inside the cabin for themHirobo Turbulence D3
a bunch of bls servo's and a 701 gyro
Powered by an OS91 hz and a MP2
Winner of the LHC Scale Cup 2011
1/4 scale Vario Bell 47 G3
1/3 scale Vario R22
2012 LHC Scale Cup Judge
member of save the flybar foundation
www.alcesterhelicopterclub.bmfa.org
sigpic
Comment
-
That colour is supposedly red,but on reading the reviews on the paint they all complained it was Orange so I thought I would give it a go and I was well pleased as it does look Orange.
Hirobo Lama with Electric Conversion
GraupnerMZ24 PRO
Comment
-
Hirobo Turbulence D3
a bunch of bls servo's and a 701 gyro
Powered by an OS91 hz and a MP2
Winner of the LHC Scale Cup 2011
1/4 scale Vario Bell 47 G3
1/3 scale Vario R22
2012 LHC Scale Cup Judge
member of save the flybar foundation
www.alcesterhelicopterclub.bmfa.org
sigpic
Comment
-
Started on the main colour now.
Only problem is with 1 large can only did one coat on the parts in the pics.
I need to raid my piggybank for more cans.
DSC00672.JPGDSC00673.JPGDSC00674.JPGHirobo Lama with Electric Conversion
GraupnerMZ24 PRO
Comment
-
if you've painted the whole tail truss it will take a lot of paint as most of it is wasted painting fresh airHirobo Turbulence D3
a bunch of bls servo's and a 701 gyro
Powered by an OS91 hz and a MP2
Winner of the LHC Scale Cup 2011
1/4 scale Vario Bell 47 G3
1/3 scale Vario R22
2012 LHC Scale Cup Judge
member of save the flybar foundation
www.alcesterhelicopterclub.bmfa.org
sigpic
Comment
-
I've now painted a couple of coats on most of the orange parts now.
Waiting for them to fully dry then I need to wet and dry the stabs as they have a couple of runs in them and a couple of the other parts have the odd blemish so I'll do the same with them.
I will then give a final coat of paint before clear coating the lot.
DSC00675.JPGDSC00676.JPGDSC00677.JPGDSC00679.JPGDSC00681.JPGDSC00683.JPGDSC00685.JPGDSC00686.JPGDSC00687.JPGDSC00688.JPGHirobo Lama with Electric Conversion
GraupnerMZ24 PRO
Comment
-
tango orange
Hirobo Turbulence D3
a bunch of bls servo's and a 701 gyro
Powered by an OS91 hz and a MP2
Winner of the LHC Scale Cup 2011
1/4 scale Vario Bell 47 G3
1/3 scale Vario R22
2012 LHC Scale Cup Judge
member of save the flybar foundation
www.alcesterhelicopterclub.bmfa.org
sigpic
Comment
-


Comment