Did YOU fly today??

[Audi_TT 83]

i flew today, it was really good, had 2 flights of my 500e where i practiced some auto landings. and i had one flight of my hk600 where i had to do a real suto as i lost drive when the HK main gear stripped,
luckily i have a spare main gear from my 550e so i fitted that. but then on the test flight in the garden i broke the skids so i have to get some tomorrow

[Steve]

No, didn't fly today, had to work.

Looking forward to tomorrow.

[Audi_TT 83]

meant to say i plan on flying tomorrow also, hopefully it will be another glorious summer day in spring

[Flying_Amp]

Had a great day 4 flights on the 450X, and first inverted flips at height....not fazed whatever direction it's in now after progressing from a MCPX and flight sim a few weeks ago.

Could'nt ask for better weather either. Also a bit of 3D on the planks in between lol

[electricsceadu]

i had a fly today
with the vario r22
a graupner jet ranger
a sdx50

[milly0812]

Flew at Hayling Island today, 2 flights with Rave and 4 with 600esp, and done in shorts and tee shirt. It was luvverly
IMG_0584.jpgIMG_0581.jpg

[highlightshadow]

Flew at the club field and was great. Another 6 packs done

[r4nd0m]

still learning to get my head around it - I had an amazing day today

2 flights on my trex 500, as the 600 I initially bought was too intimidating - but the 500 just received the rc booya canopy mounts - and when I was up for the third flight I realized one canopy mounting bolt complete broke off (though they werent too tight from my perspective) ...

eager to fly as I was I tried the 600 again and had 4 flights on it without any issues at all during the final flight not even touching grounds with my undercarriage (still under 20 batteries in total) except for lift off and landing ... seems I am making some serious progress - finally ...

[viper50]

I had my maiden flight with my Blade 400. Broke 2 blades with the first flight. Fixed it and then flew for about 2min. and wind was just to strong for me and the nerves got the better of me. have to upgrade my servos the standard servos of the blade 400 are rubbish. Hope my next flight is better. Will have to practice more on phoenix sim
Cheers Johan

[p4ddy]

Flew at Hayling Island today, 2 flights with Rave and 4 with 600esp, and done in shorts and tee shirt. It was luvverly
[ATTACH=CONFIG]39645[/ATTACH][ATTACH=CONFIG]39646[/ATTACH]

Your the man mate LOL....I was flying in jeans & a hoody with thermal lining, the sun was out but it was still a bit chilli 'bbrrrr'. Oh & to top it off once i finished me & the wife got locked into our car & i had to climb out the back window before we suffucated or got slow roasted

[waveydavey]

Had a good afternoon after work. Four flights on the Fusion and slowly beginning to really like it. Still not sure about flight times, currently 5mins and only just getting warmed up. But, hey ho. Hopefully rebuild the 600 through the week and see how I mix it with nitro next weekend, or Wednesday after work.

[Audi_TT 83]

two flight with my HK600 as it was really windy the others stayed in the car, but was another good day. hopefully it will get warmer this week today was cold

[vinny155]

1 flight on the srimok and 10 on the 550..lol..550 is fast becoming a favorite,its awesomebut only getting 4mins out of it

[AcidDrink]

Great day at the field, usual protos flying and some TDR, getting more comfortable with it, it's amazing how precise it can be, funnels nose down in one spot with very little corrections needed, set and forget, some mandatory huge loops as well
Hope next weekend weather is good.

[tourerjim]

Great day at the field, usual protos flying and some TDR, getting more comfortable with it, it's amazing how precise it can be, funnels nose down in one spot with very little corrections needed, set and forget, some mandatory huge loops as well
Hope next weekend weather is good.

I love doing them funnels, gone through loads of packs over this weekend, got a couple of early finishes in the week so hope to to get through few more lipo's