I think so how do you check it properly
Announcement
Collapse
No announcement yet.
It's turned up
Collapse
X
-
... on a micro - just look!
Bear in mind that a heli will only move where the swashplate tells it to. So, if the heli is lurching forwards, logic says the swash must be leaning forward.
On larger helis, you use a swash leveller, but on a fixed pitch micro - plain old eyesight!Tom
sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
SAB Goblin 630 Competition - Castle Edge 120HV, vBar Neo
Blade 700X - Castle Edge 160HV ESC, Mini vBar
Logo 550SXv2 - Castle 130LV ESC, vBar Neo
.... and a Gaui X3
Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims ... and two EGS'
Comment
-
Any chance you can post a video? It would be useful to know if this is a violent "shooting" off, or merely a slight drift ...Tom
sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
SAB Goblin 630 Competition - Castle Edge 120HV, vBar Neo
Blade 700X - Castle Edge 160HV ESC, Mini vBar
Logo 550SXv2 - Castle 130LV ESC, vBar Neo
.... and a Gaui X3
Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims ... and two EGS'
Comment
-
Well I have to say a big thank you to niel aka oddsock for sending me not only the metal blade grips but a full blade msr, 4 battery's and loads of spares the only thing needed was a new fly bar so I orderd it straight away
he said he thought it was all there and when I opened the package I found loads of stuff so set about building the msr up. The main frame had no bars for the frame but I just drilled it and made a new one out of carbon fiber and it worked a treat

all the stuff that came

this is still to fit polished tail boom motor cage and carbon fiber rear fin

the heli almost done

here is the msrx with the bling blade grips and new o rings to take the slack out of the head


i am over the moon on all of the stuff and should be flying the msr by the end of the week.
this hobby is defo taking over I will have to buy a bigger house for all the helicopters haha
Syma s107g
syma s33
blabe msrx
blade mcpx v1
hubsan x4 v1
align 450 clone
spektrum dx6i
pheonix v3
Comment
-
-
Well these ones are fine, have done upto 5 piros in a row with no forward or any drift
edit: just had a look on google and these ones don't do anything like that so clearly some have either faulty boards or servos or set up...
( we have 2 here they are for a 7 and a 10 year old to Learn on that's why I don't refer to them as mine but I have used them and watched the 10 year old do many piros in a row...)Last edited by Bhujang; 06-01-2014, 06:37 PM.Oxy 2, 180cfx, 130X
Goosky S1
DX 8 , Phoenix sim, DJI P3P
Comment
-
Mark - the msr will have very different flight characteristics to the msrx. The msr is self-levelling - the msrx is not.
the msr will be easier to fly therefore, but no collective pitch helis have that behaviour, so it may be useful initially, but moving on, you'll need to learn to fly without the self-levelling behaviour.Tom
sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
SAB Goblin 630 Competition - Castle Edge 120HV, vBar Neo
Blade 700X - Castle Edge 160HV ESC, Mini vBar
Logo 550SXv2 - Castle 130LV ESC, vBar Neo
.... and a Gaui X3
Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims ... and two EGS'
Comment

Comment