Announcement

Collapse
No announcement yet.

Tail wag with upped throttle fast

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #61
    On my RCE-BL25G it has written on it 5.5v-16.8v 25A.

    So I guess its important to make sure sure its set at he 5.5v position just to be on the safe side.
    Last edited by cambs flyer; 08-06-2008, 11:56 AM.
    sigpicWayne AKA OB1

    Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens

    Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
    Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
    Plus 3 Eddie Gold Stars, yay!
    Trex 450XL - Destroyed due to complete power failure at height.

    Joint second best sites on the Web:-
    http://www.vinylmorpher.co.uk/
    http://www.soulandfunkmusic.com/

    Comment


    • #62
      OK I know Mikes helping me out with this, but I now have the GY401 and if I hike up the throttle fast I still get the same tail whip.

      The control has improved ten fold, and I've learnt to compensate for this happening, but one time it's going to happen with to much happening at the same time and its going to bite me.

      The Gyro gain is up to 140% even maxed at 150% she still whips?

      I've got the DX6i arriving on Tuesday as it has easier menus and other refinements over the DX6, good as it is, but the tail whip is a real pee off, now I've got a good Gyro it's still come back to haunt me.

      Other than that she's flying like a doll, with improvements needed, as I still haven't been able to attain the level of stability Mike did last Thursday.

      Any ideas so I can experiment a bit before he can see me next, please.
      sigpicWayne AKA OB1

      Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens

      Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
      Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
      Plus 3 Eddie Gold Stars, yay!
      Trex 450XL - Destroyed due to complete power failure at height.

      Joint second best sites on the Web:-
      http://www.vinylmorpher.co.uk/
      http://www.soulandfunkmusic.com/

      Comment


      • #63
        if its whipping just as you increase throttle then holding solid without a wag it sounds like a delay problem wayne. try upping the delay pot slightly
        Ron

        hobby-hangar.co.uk
        SWRCH-GO big or Go home!
        http://www.ultimatebuildandfly.co.uk/

        Comment


        • #64
          Thanks Ron, I have a digital tail servo and they say it should be set to zero, but regardless of that, I'll do as you say and report back my fndings

          Cheers mate.
          sigpicWayne AKA OB1

          Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens

          Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
          Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
          Plus 3 Eddie Gold Stars, yay!
          Trex 450XL - Destroyed due to complete power failure at height.

          Joint second best sites on the Web:-
          http://www.vinylmorpher.co.uk/
          http://www.soulandfunkmusic.com/

          Comment


          • #65
            Can't say it made any difference mate, thanks for trying though, any more ideas by chance.
            sigpicWayne AKA OB1

            Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens

            Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
            Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
            Plus 3 Eddie Gold Stars, yay!
            Trex 450XL - Destroyed due to complete power failure at height.

            Joint second best sites on the Web:-
            http://www.vinylmorpher.co.uk/
            http://www.soulandfunkmusic.com/

            Comment


            • #66
              ooops sorry mate my bad ive just spotted it listed in your sig!!

              i thought you had 55s all round . is this my old heli thats getting all this tlc???
              Ron

              hobby-hangar.co.uk
              SWRCH-GO big or Go home!
              http://www.ultimatebuildandfly.co.uk/

              Comment


              • #67
                Thats alright mate, but have you any ideas what settings I could change to stop this.

                There must be something silly I've missed on here, as when Mike had her last Thursday he managed to get her where there was a slight wag, only very small, and the handling was out of this world.

                I've in all honesty got about 80% of what he managed, but the power up thrust when you hit the throttle hard is just as bad as on the old Gyro right now.
                sigpicWayne AKA OB1

                Inherit the Wind - Wilton Felder 1980, Smooth Jazz-Funkin' & Flyin' in the Fens

                Blade CX2 / Trex 250SE / Trex 450 SE V1 / Trex 500esp / Trex 600 Nitro Pro / Raptor 30 V2 / DX6i / DX7 / Phoenix / Ripmax twin Dock PSU / Cellpro 10S & 4S / Imax B6 x2.
                Prankster Nitro / Delta Push Prop / Swift 2 Flying Wing x3 / Swift 2 (Night Flyer LED Lit) / Swift Maxi Wing / Squall 4S/ HZ Ember / Wot 4. (all 2.4ghz)
                Plus 3 Eddie Gold Stars, yay!
                Trex 450XL - Destroyed due to complete power failure at height.

                Joint second best sites on the Web:-
                http://www.vinylmorpher.co.uk/
                http://www.soulandfunkmusic.com/

                Comment

                Working...
                X