It's turned up

[Markmark.123]

I no that mate but when all the bits were there it seemed a shame not to use it

[tomatwalden]

Not suggesting for one second you don't use it!

[Markmark.123]

I am exited to see how it flys haha

[Markmark.123]

We'll the msr has tbe so will look into sorting that out one ov the servos on the msrx is buzzing all the time but I am hoping if just needs cleaning but on the plus side I have just orded a spektrum dx6i from rc hero so will get a sim to go with it

[tomatwalden]

The linear servos on the micros have a tendency to buzz. It's not a problem until they start becoming jittery ...

[Markmark.123]

It doesn't move very far one way either

[Markmark.123]

Well I could not get the servos off because I didn't have a small enough screw driver but gave them a good blow out and it has sorted them and the heli flys again haha

need to sort the tbe on the msr but to be honest I am not keen on how it flyes but it's ok to use when am waiting for me msrx battery's to charge

[Ritchieme]

How's your flying progressing

Sent from my Nexus 4 using Tapatalk

[Markmark.123]

Very slowly haha I can hover ok but as soon as I start to move it gets away from me I think when my dx6 comes I will dum it down slightly for indoor flight

[Ritchieme]

You will get there :-)

Sent from my Nexus 4 using Tapatalk

[Markmark.123]

Hope so haha I am not one to give up like

[oddsock]

yes keep at it mark,it will click in time pal,good to see the MSR being used agen,it helped me with my orientation ,iv just ordered meself a hubsan x4 quad for indoors and borking the cat lol

[Markmark.123]

Well the dx6i and some parts for the msrx have came today. The dx6 is realy easy to set up and program I am very surprised I have set the msrx up with these setting I found on the net and will have a fly around tomoro after work see how it goes



hear is a couple of pics of the Helis and new transmitter



and the msrx with
mcps extreme skids
mcps extreme canopy ( modified to fit )
mcps tail boom
mcps tail motor
mcps tail rotor
bling cnc blade grips ( cheers oddsocks )

i no no it doesn't need any off this but I smashed the original parts and just carnt help but customise things so that they are a one off haha




what do you think and is there any other settings to slow the heli down for indoors then is there any way to switch to a mode for outside like as in normal and stunt

[Ritchieme]

Your well hooked :-)

The D/R Expo settings you see at the top of the setup instructions is the dual rates, position 0 at 70 15 is a slightly dumbed down mode whereas mode 1 is 100% rates and no expo so very nippy. If you want to dumb down more then try taking the rates down a bit more than 70. Or increase the expo to 20, have a play and see.

Sent from my Nexus 4 using Tapatalk

[Ritchieme]

In case you don't know the mode switch is the front left known as stunt or flight mode

Sent from my Nexus 4 using Tapatalk