Announcement

Collapse
No announcement yet.

Futaba FF7, 8, 9, fast Module on ebay

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Futaba FF7, 8, 9, fast Module on ebay

    Hi guys I didnt know futaba were doing a spektrum module for there Tx's I spotted this on fleabay is it any good?
    FAST MODULE
    Martin
    Aka RCSlopesurfer

  • #2
    It's not a Spektrum module, it's a Futaba one - made by Futaba.

    It suits the FF9 etc. perfectly. I went to buy one Monday at Inwoods but amongst the piles of boxes there, they couldn't find them. Will order one from Midland Heli.

    Shop price is same as that Ebay price so it's hardly a bargain.

    Cheers - Rob
    T-Rex 600CF-E * GY601 Gyro * S9251 digital Tail * S3152 digital Cyclic * 2x 4800 Aurorra LiPos * 600L Motor * TT composite 600mm blades

    3DX-400 Hybrid parts bin special * GY401 Gyro * Robbe 0.054sec digital tail * All CF/Aluminium construction bar plastic main gear

    Wren MW54 Gas turbine Jet-1 trainer * FF9 Super Radio * Phoenix Sim * Understanding wife * Unhappy bank manager

    Comment


    • #3
      Ah sorry was meant to say 2.4gig but spectrum was stuck in my head forgot specktrum was a brand. I thought it was the technolodgy i.e spread spektrum technolodgy.
      I dont have a futaba set, I have a multiplex one & it's not likely that I will be selling up just yet to buy into 2.4gig I just spotted it on the bay & thought it strange that no body here was talking about it.
      Martin
      Martin
      Aka RCSlopesurfer

      Comment


      • #4
        They seem to have crept in, but my view is Futaba should be really pushing this one since the Spektrum modules STILL aren't available for Futaba, so this is Futaba's chance to cash in on Spektrum's failings!

        Cheers - Rob
        T-Rex 600CF-E * GY601 Gyro * S9251 digital Tail * S3152 digital Cyclic * 2x 4800 Aurorra LiPos * 600L Motor * TT composite 600mm blades

        3DX-400 Hybrid parts bin special * GY401 Gyro * Robbe 0.054sec digital tail * All CF/Aluminium construction bar plastic main gear

        Wren MW54 Gas turbine Jet-1 trainer * FF9 Super Radio * Phoenix Sim * Understanding wife * Unhappy bank manager

        Comment


        • #5
          Hi

          Slapped one of these in my FF9 and set the V2 SE up on it in place of the 2.4G 6EX radio it had been on, as the saying goes does what it says on the tin!
          Only a few flights on it but works fine and the feel of the FF9 is so much nicer than the 6EX radio.

          Cheers
          Bob J

          Comment


          • #6
            Originally posted by BobJ View Post
            Hi

            Slapped one of these in my FF9 and set the V2 SE up on it in place of the 2.4G 6EX radio it had been on, as the saying goes does what it says on the tin!
            Only a few flights on it but works fine and the feel of the FF9 is so much nicer than the 6EX radio.

            Cheers
            Bob J
            Have to agree Bob though my DX7 is on the camera ship I find the set cheapish and awkward at times to play with settings. Whilst Futaba to me have always had the edge in some respects in terms of user friendly aspects. Maybe I've been spoilt with a 14MZ that's like playing with your PC at home. Ohh dear have I just started the old JR 'v' Futaba debate.

            I too am waiting for a 2.4ghz module for my MZ. In no hurry but would atleast like to see it sooner rather than later.
            Cheers
            Stuart

            Comment


            • #7
              So if I plug this into my 9cap... I suddenly loose 2 channels ?

              waiting to see what the futaba 12fg 2.4 is like....
              Mark
              www.uavaerialservices.co.uk
              BNUCs - Operations certified
              CAA - Permit for Aerial Work

              Comment


              • #8
                Hi

                Yes you will loose two channels but 7 should be enough for most, I think a 9 channel version is coming later.

                Cheers
                Bob

                Originally posted by Disc View Post
                So if I plug this into my 9cap... I suddenly loose 2 channels ?

                waiting to see what the futaba 12fg 2.4 is like....

                Comment


                • #9
                  There is an 8 channel version available in the USA, so it might make it over here soon.

                  Cheers - Rob
                  T-Rex 600CF-E * GY601 Gyro * S9251 digital Tail * S3152 digital Cyclic * 2x 4800 Aurorra LiPos * 600L Motor * TT composite 600mm blades

                  3DX-400 Hybrid parts bin special * GY401 Gyro * Robbe 0.054sec digital tail * All CF/Aluminium construction bar plastic main gear

                  Wren MW54 Gas turbine Jet-1 trainer * FF9 Super Radio * Phoenix Sim * Understanding wife * Unhappy bank manager

                  Comment


                  • #10
                    The FF9 Super is only and eight channel Tx in PCM mode anyways. You have to tweak it a bit in PPM mode to get the 9th channel out of it!!!!

                    Still, its a luvverly Tx - it'll be a shame to leave Futaba after 20 years of using their gear, but the new JR 2.4 radios are just too good. I'm now waiting for the uk version of the x9303, which I believe is the DSX9 - sorry Futaba, you just haven't kept up in the race.........
                    450SE Silver - Power: Neu1107-2Y + 10t pinion
                    ESC: Jazz 40-6-18 Gov.- Batts: 4s, FP 2100 20C. pitch +/- 11 (TC60 PC 0,25,50,75,100) HS2900
                    HS65Mg x3 + GY401 + S9650 tail
                    Rx: AR6200 - Tx: FF9Super(T9CP) Spektrum module
                    Progress Status - aggressive fff and loops
                    Crash count = 10 for 153
                    Trex time aloft = 19:45
                    -Twister Cp - Yuk!
                    -Blade CX2 - Yay

                    Comment


                    • #11
                      Originally posted by Rick Rotorhead View Post
                      The FF9 Super is only and eight channel Tx in PCM mode anyways. You have to tweak it a bit in PPM mode to get the 9th channel out of it!!!!

                      Still, its a luvverly Tx - it'll be a shame to leave Futaba after 20 years of using their gear, but the new JR 2.4 radios are just too good. I'm now waiting for the uk version of the x9303, which I believe is the DSX9 - sorry Futaba, you just haven't kept up in the race.........
                      Futaba hasn't kept up?

                      I'd recomend you look at some of the stuff on the new trannys...
                      Mark
                      www.uavaerialservices.co.uk
                      BNUCs - Operations certified
                      CAA - Permit for Aerial Work

                      Comment


                      • #12
                        Also, Futaba have had 2.4 GHz for over 15 years on their pro stuff!

                        Apparently
                        sigpicx2

                        Airskipper 50 - For sale

                        Comment


                        • #13
                          You have to admit, it does beg the question... If Spektrum hadn't stormed the market with the DX6 and DX7 so successfully, would Futaba ever have released anything for us heli/plane pilots, or would they just keep accumulating years of experience in the field instead?

                          I read that 15 years claim and the first thing through my head was, why hasn't it been released a long time ago?

                          I totally agree, they are catching up in this arena.
                          Cheers,
                          Rob
                          Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

                          | 3D Championship

                          Comment


                          • #14
                            Wish they would hurry up with the 7C 2.4 GHz over here

                            Bet it will be one hell of a lot more than the $349 in the states

                            Mark
                            sigpicx2

                            Airskipper 50 - For sale

                            Comment


                            • #15
                              so if i put the 2.4 in my ff9 i will loose my 8th and 9th channel ? not that i even use the 8th and 9th i dont think
                              T-Rex 500 ESP FBL, BeastX
                              8FG Super
                              MCPX with DX6

                              Comment

                              Working...
                              X