Oh god what have I done...

[helijohn]

Then something made me bid on a brand new Ballistic 635 kit on ebay... I've only gone and won the damn thing

I think I need psychiatric help...

I am sort of the same but I have a good reason; I like to build them..........................do you??

[PeteStewardson]

I do enjoy the builds I have to say.

[PeteStewardson]

If I run it as a 700 would spin matt black blades or spin 710's work well on the Ballisitic?

[Raving Jim]

710s are ace on the ballistic , I use the edge an radix , not tried the spins but I'm sure it will sound ace

[PeteStewardson]

Sound ace?

I looked for blades as a 635, but all th blades I found were 4mm and the 635 needs blades with 5mm holes

[Raving Jim]

The spin blades have a distinctive pop to them , sab 630 blades for the 635 or radix 625 v2 that's all ull get to fit .

[George J]

Radix 710 v2's on my stretched Ballistic 635. Personally didn't like any of the Spin blades I've tried.

[PeteStewardson]

The spin blades have a distinctive pop to them , sab 630 blades for the 635 or radix 625 v2 that's all ull get to fit .

The SAB goblin specific blades?

[Raving Jim]

Yes off the goblin 630 , 5mm hole diameter .

[PeteStewardson]

Cool ta. The kit is on its way to me now

[PeteStewardson]

Would a scorpion 4035-500KV be up to the job?

[Bavers777]

If your running it as a 600 that should be a good motor, I run the same but a 560kv in my fusion 50 running edge 623 blades and it has stacks of power. Not familiar with the rave so might be best to get a second opinion on that. The fusion is also pretty light works well running on 3300 and 4000 packs 12S ( 2 x 3300 batteries and its really powerful and light)

[PeteStewardson]

I'm no stick banger so I doubt I'll be stressing the motor too much, I'll be sport flying mainly.

[Bavers777]

It will definitely be powerful enough.

[trillian]

Yeah the 4035 can easily handle 710mm blades at 2000 rpm so with smaller blades it will have an easy life and not even break a sweat.