Tweet
had a word with andy at realraptors since my pre-order is there. they are hoping for uk price confirmation this week.
cheers
cheers
-
-
End of August for me, since I didnt pre-order, thats my own estimation correct me if I am wrong.
Choice between the 939 or the sb18 still cant decide.Comment
-
I'd recommend the 939 if it's going on an OS 91 SZ, works very well. Haven't tried the SB18 though.
TrevSent from my PC using Windows 7
- CSM
- Midland Helicopters
Comment
-
They tell me the SB18 gives slightly more power, no way of knowing for sure without buying both.
Last edited by mccall; 13-06-2008, 04:43 PM.Comment
-
i have personally tried the sb16, sb17, 938, 939 on my synergy and the sb17 was the best one for it given the HS i wanted to run. to get the best out of the sb17 you want to run under 15750 and above that you want the sb18 (hence i never got the sb18 to try, needs to rev to make use of it)
the problem is the sb pipes are considerably more expensive.....thats the users choice if they think it is worth that. the word on street is the 938/939 was made with 15% fuel in mind (all hatori pipes actually not for USA market) given the laws in the east from nitro vs oil content, not sure of that one but thats what forums say. the sb series is made for the usa market where it's mostly 30% thats used. i would say based on my own findings the sb series does have more power but i'm not convinced it's worth the extra 50 quid or so tbh.
cheersComment
-
Price Confirmed
Hi All
I have just had an e-mail from Update RC in Belgium confirming the price of the T-rex 700 at €674.99. That converts to around £530...
Cheers
RussCheers Russ
x4 Eddie Gold Stars!Comment
-
That's probably in the ballpark, but direct conversion shouldn't be assumed
Cheers,
RobTeam Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo
| 3D ChampionshipComment
-
align have finally put the price up on their website.
http://www.align.com.tw/shop/product...oducts_id=2305
$789 which in todays rates is £400 exactly rrp..............i can't see it being under £500 here.
spares prices also up (2 of everything tt apart)-
Flybar Rod/570mm
HN7009
USD$7.99
Main Shaft
HN7010
USD$16.99
Main Drive Gear/164T
HN7019
USD$16.99
HN7047 Tail Boom/Black
USD$16.99
Torque Tube
HN7056
USD$15.99
cheersLast edited by raptorheli2; 19-06-2008, 12:19 PM.Comment
-
I found the kit prices match Hong Kong prices pretty well but we will see
Hmmm a 700N from Flying Hobby for £400....
Comment
-
Originally posted by raptorheli2 View Post
Those prices arnt as bad as I thought Paul..
Mmmm, Still within a fraction of what I set my limit at..
Comment
-
if the price being bandied about for the kit is anything to go by then those prices will not be as keen in UK i fear. we should find out soon though, was meant to be today/tomorrow last i was told.
cheersLast edited by raptorheli2; 19-06-2008, 09:13 PM.Comment
-
some prices are on trexmad just now which is great news. not sure if these are final but they are up there anyway.
the total for packets of booms, masts, TT, main gears, flybars in UK is £60.95
as a comparison i priced the synergy for same parts and it was £79.95. remember with the rex there is 2 booms, masts, main gears and flybars.
cheersComment
-
Has anyone got a link for a .pdf manual ?Cheers
StuartComment
-
http://www.thetrexforums.com/downloa...production.pdfOriginally posted by Stuart View Post
It's a pre-production manual though Stuart.T-Rex 700NP - Align 91HP - Hatori 938 - Kasama Header - Align 690Ds - Align DS620 Throttle - Align DS610 x 3 - Spartan DS760/Align DS620 - QuickUK Tail Grips & Header Tank - Reactor X - SwitchGlo
Transmitter - Futaba 12FG G3 2.4Ghz
Comment
Comment