If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
i had 4 good flights then on the 5th battery my tail kept on kicking out i lowered the gain and carried on it happened anther 5 times so i thought i take it home and have a closer look and change the beastx pad as i was using the stock 1 at about 47 on the gain dx7 (now using macro double sided foam tape thanks jimmyhorn and gain up to 55 small improvement but every little helps
so i change over the pad and just brushed past the tail servo and it fell out into my the tail servo mount snapped (trex 450 pro) how lucky was that i reckon a couple more tricks and it would of fell out of the sky in a burning mess..erm OK not burning but you get the picture
Good day out with my mates today, had 3 flights with my velo n2 and 2 flights with my 700e DFC was also good to see gixermam out with his avant 90e "I love that Heli" and Forza with his new logo 550 another Heli that ticks all the boxes think this summer is going to cost me LOL!!!!
That 550 sx is sweet meat and the colours just seem to pop in any colour sky.......it's on my wish list too
sigpic
Rave ENV Nitro
New Logo 550
Synergy N5c
TSA 700E night flier I use VBar control because it's feckin awesome I use NEO rescue when I remember to
5 x EGS thingys and a Platinum star doo dah
had a few good flights on my 700 and then I took my quad out for FPV'ing ... during one flight I actually caught two full moons on it - wonder where they came from ...
Sev
--- Thunder Tiger E700 BD3SX
Trex 700E DFC HV BD3SX (Night Flyer) Trex 450L DFC BD3SX Trex 150 PRO DFC Blade Nano CP X
Blade mCP X v2
Blade 130X
DJI Inspire 1 DJI Phantom 2 iOSDmini
EMAX Nighthawk 280 Pro FPV Racer
EMAX 250 Pro V2 FPV Racer Futaba 18MZ
Phoenix V5, AccuRC, neXt & RX2SIM MK Heli ClubMKMAA
Proud Owner of:
This morning I had 2 flights on the 550 SX and one on the 600N. Looks like the 600 will need an overhaul as the logs were the same colour as the canopy on the SX although it didn't really show in flight. Out for a walk with the family this evening and thought it would be rude not to grab another 2 on the 550 SX. A very good day.
only flew three packs in the morning - planned to fly in the afternoon but all the fields in the area were occupied by footballers of various ages. In fact, still are - almost 9pm !
Trex 450 DFC with AR7200BX and several small E-flite Blades
Great day at Frontier 2 more of my mates from A"I"ra joined this week so there were quite a few of us today, lovely weather if little breezy at times.
3 Flights on the 700, 3 on the 500 and 2 on the 450. All in all not to bad today, trying to mix it up a bit and try some new things
2nd place sports class, Helifest 2015
Proud member of Frontier RC Association
Gaui X7 Formula Vbar 500 Pro Vbar Trex 450 L Dominator Vbar
Oxy 3 Kbar
I had 3 flights with the Goblin 500, 4 with the 550e & 4 with the 450, still trying to master backwards inverted circuits, but not much progress made today as I was flying like a complete numpty. Grrrrrrrrrrrrrrrrrr!!!!!!!
Had 2 packs on the 600efl pro and loved it, got to sort the velo50 after it stripped the rear gears in flight so in for repairs, hate mechanical problem crashes, think the ys60 might have abit too much grunt!
Dan
Velo50, fbl head, AR7200bx, YS56sr, LiFe pack, JR8915, DS650 600efl pro, beastx v3, Gryphon 7075lmt, ds610,ds650 MCPX v1, microheli head n swash MD530 scale with Velo50 mechs, TGY1266HV, DS655, turnigy 3D-H,nav lights
This morning I had 2 flights on the 550 SX and one on the 600N. Looks like the 600 will need an overhaul as the logs were the same colour as the canopy on the SX although it didn't really show in flight. Out for a walk with the family this evening and thought it would be rude not to grab another 2 on the 550 SX. A very good day.
Just need to add Bothma's Velo N2 to my fleet ;-)
oh go on then mate!!!!! you can have another go with it tomorrow LOL!!!
Great day at Frontier 2 more of my mates from A"I"ra joined this week so there were quite a few of us today, lovely weather if little breezy at times.
3 Flights on the 700, 3 on the 500 and 2 on the 450. All in all not to bad today, trying to mix it up a bit and try some new things
I had 3 flights with the Goblin 500, 4 with the 550e & 4 with the 450, still trying to master backwards inverted circuits, but not much progress made today as I was flying like a complete numpty. Grrrrrrrrrrrrrrrrrr!!!!!!!
Yep had 1hr20 in a friends dads microlight this morning. Took off from our club and flew around the Trent near Gainsborough, flew over my house then had just over 10mins on the sticks, what a feeling and a breeze to fly! Got down and the pilot told me I was the best passenger he's had take the controls!!! Come'on!! He's asked me to go up again to see if it was a 1st time fluke.....lol!986787_10201217536429800_1351408525_n.jpg986793_10201217537349823_762727705_n.jpg986534_10201217537749833_1337340743_n.jpg
Dan
Velo50, fbl head, AR7200bx, YS56sr, LiFe pack, JR8915, DS650 600efl pro, beastx v3, Gryphon 7075lmt, ds610,ds650 MCPX v1, microheli head n swash MD530 scale with Velo50 mechs, TGY1266HV, DS655, turnigy 3D-H,nav lights
Comment