If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I think if you have DSMX you should think twice Nick, consider using DSM2. For some odd reason the DSMX isn't binding properley. Angelos is investigating this at the moment.
Humble owner of 7 Eddie Gold Stars and Ex - member of Mk Heli Club
sigpic
I think if you have DSMX you should think twice Nick, consider using DSM2. For some odd reason the DSMX isn't binding properley. Angelos is investigating this at the moment.
DSM2 Dave,no probs so far
You said you reduced expo,was that cyclic....i use no expo on vbar cyclic but 10% on my tails.
T- rex 600n V-bar Logo 550sx V-bar Logo 600sx V-bar Logo 600sx V-bar night flyer
VBControl, but not the gay white version as i'm simply not gay enough to pull it off!
You can put the master in SV5 as with the governor disabled that will be the throttle channel passed straight out but set the servo type to analogue and then you can put slave to rx port.
You can put the master in SV5 as with the governor disabled that will be the throttle channel passed straight out but set the servo type to analogue and then you can put slave to rx port.
Which servo?.....Is this a throttle servo im not using?...where is the setting.
Although i have been through the whole lot it's easy to get lost through thinking TOO much lol.
T- rex 600n V-bar Logo 550sx V-bar Logo 600sx V-bar Logo 600sx V-bar night flyer
VBControl, but not the gay white version as i'm simply not gay enough to pull it off!
Comment