Announcement

Collapse
No announcement yet.

DX7: What can I keep?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Thanks very much, guys. I think maybe the site I was looking at may be misleading then. But you've cleared it up. C'mon the DX7!
    Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
    Blade CX2 - With AR6100
    Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
    Based in Brisbane , Australia!
    Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

    Comment


    • #32
      Originally posted by boggie View Post
      bugger ive just spent twenty minutes saying that Chris
      Sorry Ron

      I reckon a lot of these Myths about the DX7 come from people who are very set in their ways with the 35mhz system and have preconceptions about how it works..

      The simple thing is that the system is pretty much bullet proof and i have not read about any real issue to date with it

      All i know is i totally love mine,especially on the electrics,the piece of mind it gives you is very comforting,,we have had a couple of frequency issues at both my clubs recently with new people walking around switching Tx`s on without realising there is a protocol to be followed,a couple of the fliers were worried but i didnt really care in the way that they did as i knew i couldnt be shot down in any way

      Comment


      • #33
        n/p mate
        mine was a bit long winded!!
        im certainly glad i bought mine, when i decided to start with this hobby i was tempted to buy the cheapest of every thing and then slowly upgrade but got the dx7 cos my l.h.s told me it was the last one in stock and would not be available again for a while.(this was sept last year) and i believe he still hasn't got any.
        Ron

        hobby-hangar.co.uk
        SWRCH-GO big or Go home!
        http://www.ultimatebuildandfly.co.uk/

        Comment


        • #34
          Right, I think I've landed a good deal. I asked for the guys number, so that I could get a deal off him. (Ebay seller in the US). Called him - good guy. Helpful. He cut me a good deal.

          DX7 with 2 AR7000 receivers (One for Trex and one for Raptor) - no Servos..

          £191 delievered!!
          Not too bad!

          Wait, lets see if it does arrive though.
          Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
          Blade CX2 - With AR6100
          Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
          Based in Brisbane , Australia!
          Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

          Comment


          • #35
            sounds good craig i paid the standard....£242 for dx7 ...1rx....4 servos
            realy you would only need a ar6100 for the rex (very small)
            Last edited by Boggy; 28-05-2007, 10:40 PM.
            Ron

            hobby-hangar.co.uk
            SWRCH-GO big or Go home!
            http://www.ultimatebuildandfly.co.uk/

            Comment


            • #36
              Damn, Boggie! Never thought of that!
              Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
              Blade CX2 - With AR6100
              Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
              Based in Brisbane , Australia!
              Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

              Comment


              • #37
                Actually, I think I use all 7 channels. So 6 would be insufficient. Does the AR7000 fit into the Trex?
                Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
                Blade CX2 - With AR6100
                Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
                Based in Brisbane , Australia!
                Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

                Comment


                • #38
                  the 7000 would fit but the remote reciever may be a little hard to find a home for, I use the 6100 in my 450SE and it works perfectly. not a single glitch since installing it. i'm using the new recievers in all my stuff as I finish it now.

                  A really fantastic radio youll love it crailis
                  All the best
                  Tony.
                  Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N


                  Comment


                  • #39
                    Thanks Tony.
                    I'll try and get the guy to swop me to a 6100 for my Trex...
                    Might be a bit late now...
                    Worst comes to the world, I'll be able to use the 7000, at a squeeze?
                    Trex 500CF - GY401 with S9254, HS-5245MGs, Torque Tube, AR7000..
                    Blade CX2 - With AR6100
                    Spectrum DX7 Tx (2.4Ghz), Phoenix Sim (1.05c)
                    Based in Brisbane , Australia!
                    Past helis: Lama V4, Raptor 50, Trex450SE, Gaui EP550

                    Comment


                    • #40
                      The 6100 is quite a bit cheaper so make sure he drops the price
                      ive been paying 40 quid for 6100s here and 58 ish for ar7000s
                      Gaza07

                      Trex 500esp 6s Beast-X V3
                      Trex 600esp 12s Beast-X V3
                      A few Multi Rotors
                      Multi Rotor Forum http://www.multi-rotor.co.uk

                      Comment


                      • #41
                        Also if you go for the 6100 make sure it has the v1.2 silver sticker onit or you will have to send it back to be upgraded as the non v1.2s have a bug in them
                        Gaza07

                        Trex 500esp 6s Beast-X V3
                        Trex 600esp 12s Beast-X V3
                        A few Multi Rotors
                        Multi Rotor Forum http://www.multi-rotor.co.uk

                        Comment


                        • #42
                          "people who are very set in their ways with the 35mhz system and have preconceptions about how it works.."

                          So that'll be the plank fliers then all aged about 50+ then :P Or Gimmers if you prefer a shorter description.

                          You get 'em at every flying field, the doomsayers, this will never happen, that new fangled tech will never work, yada yada yada. I'm surprised they accept 35mhz and arent still on control lines and free flight chuck gliders with cox engines.

                          Comment


                          • #43

                            Comment

                            Working...
                            X