I've never noticed a buzz with my dx7, but if I put my ear to it it does have a barely audible buzz.
Announcement
Collapse
No announcement yet.
DX7 buzzing
Collapse
X
-
www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for real
-
Thanks for all the feedback chaps it's been a real buzz!!
seriously tho my buzz is loud enough to warrant a call to horizon I think, plus they may also be aware of probs on the rudder channel!JAMIE,
-Mini Titan e325-
Sonix cnc head & tail rotor
GY401 & HDS 577 servo
HS65mg's
CY radix blades
scorpion hk2221-8 motor & 55a esc
Spektrum DX7-goodbye glitches
Comment
-
Jamie - if you get to the bottom of the " buzz" please post as I think there are enough people on here who would be very interested in the statement from Horizon. regards
Dave

TREX 600 N PRO - awesome and superb to build -
Trex 450 se v2 - Brilliant heli.
Trex 500 -
tested hovered (24.03.08) - brill 
Blade 400 - tricky little blighter - Rebuilt more times than i can remeber.
Blade cx2 - The start !
Comment
-
I was assured by a very helpful chap at Horizon today that a buzzing DX7 is completely normal! He gave no clues as to what was causing the buzz but as long as its not a problem I am not bothered.
He did seem to think though that the loss of right rudder in flight could be a set problem so it will be going back to the place it was bought from to be checked, replaced or repaired (bugger, I have to go back to the 35meg set again for a while
).
JAMIE,
-Mini Titan e325-
Sonix cnc head & tail rotor
GY401 & HDS 577 servo
HS65mg's
CY radix blades
scorpion hk2221-8 motor & 55a esc
Spektrum DX7-goodbye glitches
Comment
-
Mines always buzzed a little mind. I heard it was normal and read a thread about it somewhere so i aint done anything about it. Its never bothered me and i only notice it in the house and when its silent.
Cheers
Lee
Comment
-
i was told it was something to do with one of the coils inside the unit if that makes sense. Apparently it happens to the UK units but not the US ones. Ill see if i can find the thread on the darkside.
Cheers
Lee
Comment
-
Right apparently the voltage regulator in the dx7 isn't a very efficient one and this is where the buzzing noise comes from. There are posts on the darkside from a guy that explains how to change it for another unit that he says will also double your battery time. Could be a good mod but only if your warranty has already ran out
Do a search for 'DX7 Buzzing'.
Cheers
Lee
Comment
-
Id only ever recommend it if your warranty has ran out anyways. As with anything really.
Lee
Comment
-
JFYI,
The hobby store that I pruchased the DX7 from happily exchanged it for a new set. I have set up the heli once again and ran four packs through it. The problem with the right rudder is no longer there!! Yippee
Oh yeah the new set buzzez as well!JAMIE,
-Mini Titan e325-
Sonix cnc head & tail rotor
GY401 & HDS 577 servo
HS65mg's
CY radix blades
scorpion hk2221-8 motor & 55a esc
Spektrum DX7-goodbye glitches
Comment



Comment