Announcement

Collapse
No announcement yet.

DX7 buzzing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DX7 buzzing

    Does anyone else with a DX7 hear a buzzing comming from the Tx when its turned on? Since I purchased the set it has done this and I am now wondering if there is some kind of fault with it as I have lost full control of right rudder! I am going to put the heli back onto the 35mhz set to check rudder operation but I thought I would ask about the buzz first.
    JAMIE,

    -Mini Titan e325-
    Sonix cnc head & tail rotor
    GY401 & HDS 577 servo
    HS65mg's
    CY radix blades
    scorpion hk2221-8 motor & 55a esc
    Spektrum DX7-goodbye glitches

  • #2
    Mine doesn't but I have heard others on here discussing the DX7 Buzz.

    May be worth giving Horizon a ring they are really helpfull
    All the best
    Tony.
    Thunder Tiger E700 - Align 700N - Fusion 50 - Align 600N


    Comment


    • #3
      I too had a similar thing with right rudder but no buzzing, if i was hard over right ie doing chaos id lose the tail but if i backed off a bit i regained control WEIRD. Have sent my dx7 to horizon today fer repair as its not outputting an rf signal and i caused me to crash my k3d on friday. So fingers crossed its fixable!

      Comment


      • #4
        that is the same symptoms I am experiencing. Was it the Tx?
        JAMIE,

        -Mini Titan e325-
        Sonix cnc head & tail rotor
        GY401 & HDS 577 servo
        HS65mg's
        CY radix blades
        scorpion hk2221-8 motor & 55a esc
        Spektrum DX7-goodbye glitches

        Comment


        • #5
          Spektrum dx7

          Comment


          • #6
            thats the one
            JAMIE,

            -Mini Titan e325-
            Sonix cnc head & tail rotor
            GY401 & HDS 577 servo
            HS65mg's
            CY radix blades
            scorpion hk2221-8 motor & 55a esc
            Spektrum DX7-goodbye glitches

            Comment


            • #7
              hoping its summat simple and hoping even more it doesnt cost owt to fix!! lol.

              But when i get it back im seriously considering a dsx9 so i can run the vibe with 140 degree ccpm, but i do love my dx7!! Another quandry! lol

              Comment


              • #8
                You can run the Vibe on 140° CCPM on the DX7.. I did
                I think there's a thread on here about the correct p.mixes to put into the Tx...

                Otherwise, once Real Raptors knowledgebase is back up and running, it's in there
                Cheers,
                Rob
                Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

                | 3D Championship

                Comment


                • #9
                  mine buzzes slightly, only slightly though and has always done it since new, cant say im bothered by it!

                  Comment


                  • #10
                    Again mine does the same (buzzes) and has since I purchased it in Feb 2008. I was worried at first but its been a brill piece of kit and no issues with it.

                    TREX 600 N PRO - awesome and superb to build -
                    Trex 450 se v2 - Brilliant heli.
                    Trex 500 - tested hovered (24.03.08) - brill
                    Blade 400 - tricky little blighter - Rebuilt more times than i can remeber.
                    Blade cx2 - The start !

                    Comment


                    • #11
                      Mine buzzes also very slightly.
                      Adrian.
                      sigpic
                      http://www.passrightmotoringschool.co.uk

                      Comment


                      • #12
                        anyone else with rudder problems also?
                        JAMIE,

                        -Mini Titan e325-
                        Sonix cnc head & tail rotor
                        GY401 & HDS 577 servo
                        HS65mg's
                        CY radix blades
                        scorpion hk2221-8 motor & 55a esc
                        Spektrum DX7-goodbye glitches

                        Comment


                        • #13
                          mine buzzes but no rudder problems...well, not attributable to the tx anyways...more to the chimp at the controls
                          T-rex 600n Pro
                          Century Bell 222 (build in progress)
                          JR Vigor CS
                          Hirobo Freya (Deceased)
                          Blade CX2 (Retired)

                          Phoenix sim

                          Comment


                          • #14
                            mine buzzes to and as always done it cant say ive had any probs yet with it tho.

                            Comment


                            • #15
                              I've got 2 dx7s. Both buzz a little it'd completely normal. Unless it's particularly loud, then I'd get it checked out. You need to put your ear to it to really hear it.

                              As has already been said Horizon are very good turning stuff around and are very helpful so if you are concerned send it back to them.
                              Slow Mo Blade 550x

                              Comment

                              Working...
                              X