The best gyro

[horsham rc]

I have one with the alu case, used it on the 600 for a few months till i changed it to V-bar. Make an offer? (Never crashed)

Pm me details and I will look I'n to it. Thanks..

[xygax]

Spartan for sure so simple either 760 or Quark (Quark is smaller) i have them on all except a chinooook ! that has a custom 3 axis thingy...

Steve

[Paulice]

Pm me details and I will look I'n to it. Thanks..

PM sent

[electricsceadu]

701 fantastic gyro , easy to set up and holds very well
611 gr8 gyro not as easy as the 701 to set up
520 gr8 gyro, easy to set up etc
401 plug and play, common as dog droppings
spartan quark does what it says on the tin
770t fantastic piro rate but drifts like most jr gyros
cheapo gyros waste of time




make sure the heli is vibe free and put some good pads on the gyro (no double sided tape from the pound shop)

[chris jones2.4]

CSM720 after flying one at the weekend!

[Steve]

The Solid G is a good gyro - save your money, do some web research and persist with it would be my advice.

[electricsceadu]

well said steve
any gyro will be rubbish if not set correctly

[Mslater]

Best tail hold I've ever had is on the beastx - Used DS760 and Futaba before but the beast seems to be spot on.

[del19_82]

Spartan (either Quark or 760) for me. They just work. The CSM720 is a great gyro with fantastic Piro rate but is a bit more picky than the spartan to setup sometimes (seen a few with issues).

As has been said, there is very little between all modern gyro's so it's really personal preference

[adieuk]

i have the spartan 760 great gyro and easy to setup

[p4ddy]

Any gyro that aint affected by Windows 7 I may borrow my mums laptop as that has an older version of windows which should allow the CSM software to run ok. I've been using a GP750 on my Logo for a long time now & i think it's a great gyro, so easy to set up, easier than a 401 but better. 720's are not hard to set up, it just looks more complicated when you have lots of things you can tweek, they do like a perfect mechanical set up though.

[sacko]

Setup and flew a Futaba GY520 earlier, felt really good and easy to setup too..

[chugga-bug]

Keep the solid G, come down to North Downs Flyers and get all the help setting up you could need. Loads of people use 'em there.

[horsham rc]

Keep the solid G, come down to North Downs Flyers and get all the help setting up you could need. Loads of people use 'em there.

Sounds like a plan as I no a fellow Heli addict that flys at this site. My only concern with this club is that most flyers use futaba and i use JR so i maynot get much help... Forgive me iv this info is rong just what I heard....

[horsham rc]

Thanks for all the posts guys lots to think about...