Using Spektrum RevLimit sensor with TJ Rev Max

[pgrbff]

Anyone using the backplate RevLimit sensor from the AR7100 Spektrum receiver with other governors?

[Pitman]

Yes, Bart101 uses it with the Multigov Pro.

[jeznewsome]

using one with a ATG

[Jamin_00]

Re: Using Spektrum RevLimit sensor with TJ Rev Max

So you don't use the rev limiter on the rx or you use a gov in conjunction with it?

I just brought a AR7100r to use on my 700

[Tim Procter]

MultiGovPro on all my 3 helis using the Spektrum sensor on the backplate.

Its clean and easy to get to.

Only downside is the Spektrum sensor is quite expensive compared to most others.

[Jamin_00]

Re: Using Spektrum RevLimit sensor with TJ Rev Max

Right so you use that at the back plate instead of magnets on the fan?

[pgrbff]

Hopefully less messy than installing magnets in the fan. Any tips/problems?

[Pitman]

Make sure you get the clearance right to the backplate. Also, the plastic bracket is very fragile, so be careful with it! I know that you can get a machined aluminium brack which looks the dogs, I intend to get some sometime to try:

Ron's HeliProz South: AR7100R SENSOR BRACKET W/SCREW BLUE=

[Tim Procter]

Make sure you get the clearance right to the backplate. Also, the plastic bracket is very fragile, so be careful with it! I know that you can get a machined aluminium brack which looks the dogs, I intend to get some sometime to try:

Ron's HeliProz South: AR7100R SENSOR BRACKET W/SCREW BLUE=

No need to buy from the states Dave.

Fastlads are selling them here now and in stock.

[Pitman]

No need to buy from the states Dave.

Fastlads are selling them here now and in stock.

Thanks, Tim!

[Kwickkwack]

I have an AR7100R on a 600 and it works a treat, as has been said be careful not to over tighten the screws and make sure they have a dab of loctite.
Very simple and as the AR7100R has a BEC as well, the whole thing is very neat.

[Smoothound]

Is the 7100R adjustable for all channels or only for the tail servo?