GP750 limit settin help!

[ronny p]

I try to set the limit on left and right, yet it still over travels to the left every time. What am i doing wrong? I hold the setup button, enter setup mode go to limit move the rudder stick to left then right, then press the setup button agian. Just binds on left travel every time. Help would greatly be appricated. Thanks guys

[Kwickkwack]

I am having a few issues with my 750. I am going to try a rebind. then through the process again. try that first.

Just remembered, make sure you have NO subtrim or trim on the rudder channel at all

[rapidgaz]

I try to set the limit on left and right, yet it still over travels to the left every time. What am i doing wrong? I hold the setup button, enter setup mode go to limit move the rudder stick to left then right, then press the setup button agian. Just binds on left travel every time. Help would greatly be appricated. Thanks guys

think you might have to do left then right mate if i remember right

[ChrisP]

Put it into limit mode, move stick left then to the right for your travel, then let your rudder stick return to neutral. Wait until gyro comes out of setup mode then test.

For some reason mine wouldn't set properly unless i let it finish by leaving it alone to come out of setup mode after setting the limits.

[ChrisP]

Another tip from the great 'Finless Bob'. Move your rudder left and right, (marking on the rudder control rod with a marker against one of the guides) and mark the rudder control rod just befor it begins to bind on the servo, this way you can just look at the marks when setting the limits knowing how much travel you have got before binding the servo

Register with Heli Freak if your not already and you will be able to download the tail setup vid, lots to learn on there

Trex 450 Pro build videos - HeliFreak