Align Governer setup

[Nicolasgreening]

Hi I have a F7C tx and I have programed Switch a as the govenor on off switch is this normail or should I program it to the same as the N idle1 and 2 switch?

[rapidgaz]

hi mate there is some good articles on helifrak for this guvna

[shaun.e]

Try this:
http://www.rcheliaddict.co.uk/showth...eferrerid=6040

I have found that 77% on the tx gives approx 1900rpm headspeed - still experimenting (tomorrow hopefully)

[t-rex pedro]

You can programme an on/off switch but I would also programme the gov to work with your idle up switch. E.g normal-off, idle 1 1900, idle 2 2100. The only reason to have an on/off switch is for getting curves close to perfect to assist the governor otherwise I wouldn't use one.

Hope that makes sense and answers your question.

[robgt]

My article on 50-tuning might also help.
Cheers,
Rob

[shaun.e]

You can programme an on/off switch but I would also programme the gov to work with your idle up switch. E.g normal-off, idle 1 1900, idle 2 2100. The only reason to have an on/off switch is for getting curves close to perfect to assist the governor otherwise I wouldn't use one.

Hope that makes sense and answers your question.

Pete,

What is your IU1 throttle curve like?

[shaun.e]

My article on 50-tuning might also help.
Cheers,
Rob

Great article Rob, many thanks.