If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Never really had problems with mine when i had it rear mounted. It aint too close to the exhaust and even when inverted ive never really had to wipe of residue. One thing i will suggest though is lightly adding a small velcroe strap over the casing. There have been reports of them coming apart in flight.
Cheers
Lee
Just to add what Lee said about putting a Velcro strap over the Gyro... I did this but tightend it down too much... Someone pointed this out to me and said it should be on tight enough so there is still some play in the strap or it can in some cases cause an adverse effect on the gyro's capability.
Comment