Xnova 4530 8d replacement shaft for logo 700

[sunny_manku1985]

Hi guys really need some help here. I'm have an xnova motor 4530 8d 500kv motor. It's was used in my logo 700xx. I have now sold my xtreme and about to purchase the new plastic logo 700 and believe I need to replace the motor shaft to a 6mm one.

Now i can see from the xnova website they do 2 shafts that are 6mm. I am not to sure of which one i would need. The (a) or the (e) which is longer.

Any help would be great. Wouldn't want to sell the motor as i really think it's great.

[ChrisB]

I have a Logo 700 and also am considering using an Xnova 4530 in it which is currently in my Protos.

I believe its Shaft E i would need at 50mm long 6mm dia.

The manual says it needs a 55mm shaft,the Scorpion 4525 currently in the heli has this shaft and it does slightly protrude from the lower bearing support so i assume a 50mm will as near as dammit be OK it certainly gets into the support brg to some degree.

So i am also interested in any info here.

Pics of Scorpion install..IMG_0770.jpg
IMG_0769.jpg

[sunny_manku1985]

Hi Chris, the images don't seem to show on my phone. It as tho the (e) shaft would be the only option. I guess I'll have to order it and get it fitted. Let's hope for the best.

Even if it slightly sits into the bearing block it should be okay.

[ChrisB]

I have tried inserting images into the text,not sure that helps.

[sunny_manku1985]

I have tried to email and Facebook xnova no replies :-(