MCPX battery parallel charging

[keithspurs2000]

Can anyone explain to me how to parallel charge up to 6 MCPX batteries using the PL6. If I buy the lead in the link below will that work ok?

Thanks

https://www.modelhelicopters.co.uk/p...ct-description

[_tj_]

That's the lead.
I guess the PL6 has a normal charge mode not balance mode.
Use normal or fast charge to charge them as a 1S.

[PKNEC]

Don't forget to add the MAH together and dial it in to your charger.
This is the one I use on my multi 4
http://robotbirds.com/catalog/produc...oducts_id=5369

[kenny d]

This is what I used for ballanced charge

Quantum Parallel 6xJST-PH Charge/Bal. Cable UMX/130X/MCPXBL Q-CL-0031 | eBay

[waveydavey]

With the PL6 you will need to select 1/2s unbalanced for it to charge

[keithspurs2000]

Thanks everyone. I've bought the lead that kennyd suggested. Hopefully I can get it to work ok with the PL6.

[kenny d]

Thanks everyone. I've bought the lead that kennyd suggested. Hopefully I can get it to work ok with the PL6.

Hi keith , it'll work fine , I used mine with a pl6 , plug it in , select how many in parallel & how many mah, IE 250mah , it will tell you it's 2s , for discharge I think I set it to 500mah , so should be no probs , Kd

[keithspurs2000]

Hi keith , it'll work fine , I used mine with a pl6 , plug it in , select how many in parallel & how many mah, IE 250mah , it will tell you it's 2s , for discharge I think I set it to 500mah , so should be no probs , Kd

Cool mate cheers.