Am I expecting to much??

[raptorheli2]

we will never know concretely how that dent got there but at this point it's of no relevence for a fix.

is your new boom the same as that one pictured as angelos has offered a fix? lets get the thing in the air where it should be ASAP!

i'll take my tail assy off when i get home and let you know the OD/ID respectively for future ref.

cheers

[Jamin_00]

I got 2 booms here.

One on the Heli and another new in packet I can compare agaist.

I will check the new boom on there now to see if that has a dent also as it's not getting tight with this one either!

[raptorheli2]

my calipers have decided to give up the ghost so i can't measure this just yet...grrrrrrr-apologies peeps, i'll pick up another set before weekend if possible.

i can say though my boom is not dented at the end where it is clamped if that helps.

cheers

[millerman]

I checked mine neither are dented velo and fusion one is the orange the other is black

[raptorheli2]

found another set of digis-

attached-sorry for crap pics-trying to take pics and hold that was a pita.

to say again-i have NO dent of any sort in the boom and i flew about 20 flights unpinned with no problems.



hth

cheers

[Jamin_00]

No dent on this new boom. I have thrown the boom clamp across the field last night as it obviously not right as the boom is fine.


No reply to my emails.

[millerman]

No dent on this new boom. I have thrown the boom clamp across the field last night as it obviously not right as the boom is fine.


No reply to my emails.

LOL why did you throw it across a field

[Jamin_00]

Cos I got the hump with it and it lucky as the heli nearly followed, if it was not for the mrs it would have lol

[Gareth-71]

Hi

Phone them, and ask for the MD.

Gareth

[millerman]

i would have called the shop first

[Jamin_00]

Failing to see the point here Kel.

If I call the shop they will replace it no questions asked this we all know. Will they get the bit replaced or will they get shafted?

Something we would never know.

Most people dont say a word and accept these things in this hooby, why?

Regardless of cost whether its a tenner or a couple of grand its the same thing!

I buy something new I expect it to work straight away WITHOUT modification needed or its not fit for purpose simple as that and I dont care what others think or say tbh

[NEAGRON]

Failing to see the point here Kel.

If I call the shop they will replace it no questions asked this we all know. Will they get the bit replaced or will they get shafted?

Something we would never know.

Most people dont say a word and accept these things in this hooby, why?

Regardless of cost whether its a tenner or a couple of grand its the same thing!

I buy something new I expect it to work straight away WITHOUT modification needed or its not fit for purpose simple as that and I dont care what others think or say tbh

I agree,most of us just accept it,I had problems with "Macgreggor's", some year's ago,Kevin Crossier spoke to me once and would not speak to me again.

What these people for get is it is you&me spending our hard earned cash that is putting food on there table.

Outrage&RC HUB have done them selves no favours here,would I buy one no way.

Good on You "BEN".

Your's,

MARTY>

[millerman]

ok.............

[Stuart]

I buy something new I expect it to work straight away WITHOUT modification needed or its not fit for purpose simple as that and I dont care what others think or say tbh

I'm not taking sides here but you could put every heli released into that box for sure then chuck in a a few transmitters, Gyros, Rotorblades, starter motors, escs, chargers the list is endless.

Personally what I would have recommend is that your heli goes to RCHub and they give it 110% lookover as is - though you might have to find that bit you chucked away now...though I can understand your frustration on it.

You never know RCHub's hands might be tied as they could be waiting on some feedback from Outrage I honestly don't know, but what I do know is that Angelos and John have a great reputation for sorting things out, when solely doing Spartan, now they have more to contend with and especially when dealing with Outrage 100% is not in there control so they have to work to other peoples timelines and findings.

Hopefully things are resolved soon enough.

[Angelos]

If I call the shop they will replace it no questions asked this we all know. Will they get the bit replaced or will they get shafted?

I already said that if you show me the part being wrong I will replace it. There is a phone number on the RC Hub website, you can call us.

-Angelos