Worthwhile upgrades for the 130x?

[MarkG_R1]

As above what are decent upgrades for this little beast?
Looking at function before bling really
Although bling is good

[C8RLS]

Upgraded Bearings and Rackonheli tail slider with KBDD tail blades and the silicon O ring kit I would suggest to be a very worthwhile upgrade, if you like Bling then the rest of the Rackonheli stuff although I have had problems with the blade holder screws.

I got mine from Kyle on this forum at http://rc-hero.co.uk who was very helpful.

Also the metal A gear which I got from the states via eBay as they weren't available in the UK then but I think they maybe now.

[jasoncook]

metal gear

[Idle Jack]

slider, tail case or bearings, and grips when you break them as the stock are overpriced, possibly o rings if u have any shakes in flight

been waiting for a metal A gear but have not tried it.

[atxplus]

Theres a thread on runryder which says the metal A gear was shorting the elevator servo, whilst before fitment the heli was flying ok. Even though the diameter of the metal gear was smaller.

[dogcow]

O-Rings, Tail Pitch Slider (RKH or MH), Tail flanged bearings and possibly metal A gear, but still waiting for mine to arrive to test it.
That should do the trick for starters.

*Correction: Just noticed these pop up, after breaking 3 of these this may also be worthwhile. Not essential, but worthwhile as cost the same as stock replacement

http://rakonheli.com/rkh/index.php?p...emart&Itemid=1

[djm]

None fly and enjoy as it is............

[collective itch]

The receipt to take it back! Sorry couldn't resist