Guys,
My TREX 700 used to be owned by the Smith Brothers and has 3x JR8915 servos on the cyclic. I think that the demand placed by these servos is killing the rx batts I have. I had an Outrage NRG 3600 rx batt that puffed after a year or so which I just binned and the NRG 2600 batt is going the same way too. After just 2 flights the Align Reg is showing one red light only and the batt is down to 35% when off-load.
Clearly I need a new batt, perhaps something in the 5000mah range which can deliver the current and last for a few more flights, but the price of the NRG batts seems a bit steep. Is there really any reason not to use, say, a solid TURNIGY 2s 5000mah 30-40c battery that will cost a fraction of the price?
Your advice would be much appreciated.
My TREX 700 used to be owned by the Smith Brothers and has 3x JR8915 servos on the cyclic. I think that the demand placed by these servos is killing the rx batts I have. I had an Outrage NRG 3600 rx batt that puffed after a year or so which I just binned and the NRG 2600 batt is going the same way too. After just 2 flights the Align Reg is showing one red light only and the batt is down to 35% when off-load.
Clearly I need a new batt, perhaps something in the 5000mah range which can deliver the current and last for a few more flights, but the price of the NRG batts seems a bit steep. Is there really any reason not to use, say, a solid TURNIGY 2s 5000mah 30-40c battery that will cost a fraction of the price?
Your advice would be much appreciated.


x 3
Comment