Excellent pics thanks.. Looks much more chunky, I like it - where exactly did you have to file ? Was it to create a groove for the canopy clip?
Announcement
Collapse
No announcement yet.
Trex 700 skids on to 600
Collapse
X
-
On the last pic near the exhaust, to the left you can see more thicker plastic. Now look on the other side, and same again thicker plastic. That thicker plastic was all the way from left to right, it's a slot. I just ground this off both skids, this was because i did not have longer screws. So only need to grind it back if you use the old screws.

so the red line is the thicker plastic i dint need to grind down, the blue line is where the plastic was.2nd heli Raptor 60 V2 still in service, Helicommand
1st heli Trex 600 nitro pro for sale (now sold)
DX7
Comment
-
Gotcha...thanks again very useful..am now convinced I need a set!
EDIT: just noticed if I used longer screws and didn't grind down, the clip would struggle to fit over the thicker plastic, right?Last edited by Rsformatc; 08-06-2011, 04:12 PM.T-REX 600N
Blade 120sr
Blade MCX2
Blade MCPx
Spektrum DX7se
JR XG11
Phoenix Sim with SimStick
Comment
-
That's right, you would never be able to fit the clip, to chunky.
You would have to file grind down just the front bit, if and when you get a set, you will see. you will also see that grinding it down gives it more surface area to bolt to the frame.
They are the same size skids as my bro's raptor 60 now, just the alloy skids them selfs on mine are a tag thicker, so may be able to fit a biggy clip from a bigger heli.
I got these from fast lads and was low on stock, and out of stock on most colours. Hence my bright work skids, they look ok in the flesh though.
Any thing else just post up on here, and i'll do mi best2nd heli Raptor 60 V2 still in service, Helicommand
1st heli Trex 600 nitro pro for sale (now sold)
DX7
Comment
-
Comment
-
600 and 700 legs are the same but the skids are different lengths I'm sure - 700 ones are a tad longer than 600s. 600 ones still fit on a 700, but with not much poking out the back end. I fitted some 600 skids onto my 700 last week and found this out.JR Vibe Fifty fb (YS56)
Comment
-
Thats the second banned todayOriginally posted by BladeStriker View Post

Paul.
2 x TDR II Bavarian Demon AXON, Pyro Comp 850/50, Kosmik cool 200, Futaba BLS, 15s
TDR Bavarian Demon 3X, Pyro Comp 750/56, Kosmik cool, 14s, Savox: SB-2282SG, SB-2283SG Tail
TDR Bavarian Demon 3SX, Pyro 750/56 comp Kosmik Cool 200, Savox,
Logo 600SE, Bavarian Demon 3SX, Pyro700/52, 80HV,
Logo 480 xxtreme, Bavarian Demon 3SX, Scorpion, Savox, YGE,
Comment



Cheeky buggers hey
Comment