Announcement

Collapse
No announcement yet.

My 700LE has flown!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • My 700LE has flown!

    After many attemps, and either work or weather got in the way, I finally got to fly my 700 this weekend. This is the first time I have flown a 90 size heli, and the first time with a nitro since my Shuttle ZX over 13-14 years ago!

    I'm happy to say 'WOW' it was just fantastic! I needed only 1 turn on a link to get the tracking spot-on, and everything else was perfect. The gyro needed no adjustment, and doing some fastish collective pumps, the tail held very firm.

    In total I did 5 flights, and the last 2 were on sunday morning when the wind had picked up alot compaired to the first 3 flights on saturday. The smoke trail was almost horizontal, and was much stronger than I would ever fly the 450 or 500 in. The heli just sat there, nice and stable, with very little corrections needed, and again the gyro was so good. I just held her across wind, and you could see the corrections the tail was doing in HH. (A bit different to the old Futaba gyro I had in the Shuttle with the motor in it wizzing away!)

    All in all, I'm well chuffed with it, and will be spending lots of money on 20% Optifuel this summer

    Here are a couple of pics of my build as well.











    Henseleit TDR V-Bar x2
    SAB Goblin 700 V-Bar
    SAB Black Nitro V-Bar YS91 Tareq SRX
    T-Rex 700e DFC V-Bar
    T-Rex 700N MAJ DFC V-Bar YS91 Tareq SRX
    Synergy N7 V-Bar OS105 HZ-R
    Synergy E7se V-Bar
    Synergy N5c FBL V-Bar
    Gaui NX7 V-Bar YS91 Tareq SRX
    T-Rex 550 E FBL V-Bar
    Gaui NX4 V-Bar
    V-Control

    Proud owner of TWO!! Platinum Stars!

  • #2
    Congratulations on your maiden Rob (and the other flights ).. Looks really nice and neat mate..

    Enjoy it and have a great time flying it.. I've flown my 90 this past weekend as well and the noise those 90 engines make is worth every penny that goes on the juice
    Avant Aurora|Trex 700LE
    Trex 600NSP|Outrage G5
    Beam E4|Twister Storm

    Trex 250|mSR|mCX|4#3B
    DX7
    |1 EGS!

    Comment


    • #3
      That is one very neat 700 Rob..

      Looks fantastic, hope you enjoy flying yours as much as I do mine..

      Comment


      • #4
        Agreed Tim Very neat installation, I particularly like the modified holder with the grommet and the wires passing that way.
        Nice one.
        Rob
        TDR (in progress)
        SAB Goblin 700
        Vibe 90SG Vibe 500E
        Trex 700 VBar, Trex 700 BeastX
        Trex 600FBL, Trex 600NP, Trex 450Pro
        Kalt Baron30
        sigpicproud owner of Four Eddie Gold Stars

        Comment


        • #5
          Nice idea on the rx tray

          Might have to copy that idea as it looks so much neater, can hide away everything under there.

          Glad your enjoying yours
          + 7 x Eddies finest EGS's


          Comment


          • #6
            Looks like a nice tidy build!

            Enjoy!

            Martin

            Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

            Comment


            • #7
              Nice one, looks awesome!
              x 3

              Comment


              • #8
                Thanks guys, the grommet was from a multi pack from Halfords. I also shortened the length of the elevator servo holder so that the push/pull rods are parallel with the side frames, thus square with the crank arm.
                I have a pair of Radix 710 FIA blades on route, as I,m not a stick banger (yet!)
                Henseleit TDR V-Bar x2
                SAB Goblin 700 V-Bar
                SAB Black Nitro V-Bar YS91 Tareq SRX
                T-Rex 700e DFC V-Bar
                T-Rex 700N MAJ DFC V-Bar YS91 Tareq SRX
                Synergy N7 V-Bar OS105 HZ-R
                Synergy E7se V-Bar
                Synergy N5c FBL V-Bar
                Gaui NX7 V-Bar YS91 Tareq SRX
                T-Rex 550 E FBL V-Bar
                Gaui NX4 V-Bar
                V-Control

                Proud owner of TWO!! Platinum Stars!

                Comment


                • #9
                  It looks lovely!!.. Just a quick question.. have you got the rubber grommets between the servo plates?
                  Eddie
                  Velocity 90 FBL BeastX V3
                  Trex 600 LE FBL BeastX V3
                  Trex 500 EFL Pro BeastX V3
                  Fusion 50 FBL
                  VBar
                  All powered by a DX8

                  Comment


                  • #10
                    Originally posted by Eckchaz View Post
                    It looks lovely!!.. Just a quick question.. have you got the rubber grommets between the servo plates?
                    Yes mate, the grommets are in there, and the screws are 'nipped' up enough to stop too much servo movement, but not squashing them solid.
                    Henseleit TDR V-Bar x2
                    SAB Goblin 700 V-Bar
                    SAB Black Nitro V-Bar YS91 Tareq SRX
                    T-Rex 700e DFC V-Bar
                    T-Rex 700N MAJ DFC V-Bar YS91 Tareq SRX
                    Synergy N7 V-Bar OS105 HZ-R
                    Synergy E7se V-Bar
                    Synergy N5c FBL V-Bar
                    Gaui NX7 V-Bar YS91 Tareq SRX
                    T-Rex 550 E FBL V-Bar
                    Gaui NX4 V-Bar
                    V-Control

                    Proud owner of TWO!! Platinum Stars!

                    Comment

                    Working...
                    X