If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
mine is the same on its madian flight engine screeming and the blades just about turning
strip it out found very large gap between clutch and bell
fitted new clutch liner from a sceadu i had lying around not flown it yet
kasama srimok 90n
T rex 700 Ys91sr futaba bls 452 GY520+bls 251 aerospire gov Fromeco reg
Futaba 10c empty bank account
Tom, that is way more engine rpm to get clutch engagement then with mine. Are you using the standard Align centrifugal clutch ? Fast Lad Performance
Having blown a clutch up, I opted for the QuickUK, which Has a tiny bit more diameter, and is also thicker arms. Fast Lad Performance
Tom, that is way more engine rpm to get clutch engagement then with mine. Are you using the standard Align centrifugal clutch ? Fast Lad Performance
Having blown a clutch up, I opted for the QuickUK, which Has a tiny bit more diameter, and is also thicker arms. Fast Lad Performance
Yes standard clutch Mike Think I will wait till it goes and then replace, will be good fun to see if I can land it
Ive just replaced my clutch in the 600 because one of the rollers fell out of the bearing on the old one! Just used a standard one tho,wish i went for QUK now as its reving its knackers off before the blades even think about moving :-(
Gonna give it a go at the weekend and see what the out come it!
Comment