Announcement

Collapse
No announcement yet.

Century Airwolf 50 Scale Project

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • there ist somebody who sprayed his airwolf in metallic-light-blue an silver.
    on the sides he put batmanbuttons on it.
    horrible for a real airwolf-fetischist
    http://www.modellhubschrauber.at
    http://www.rc-web.at/forum/showthread.php?t=2836

    please no pink, don't do such a pain to the lady !

    Comment


    • Yeh,no pink guys,he,he

      Thanks for the pics Mark,nice job

      Comment


      • Well, the whites all done, just need to mask it all out in the morning ready for the grey stuff.

        Fingers crossed, IF (Bloody BIG IF!!!) I get it masked AND painted by early afternoon, then IF the weathers nice i'll be going flying sooooooooooo I could take the fuse back and give it back to Wayne for the last stage (but dont hold your breath though lol, I have been known to be lazy in the mornings !!!!!)
        Trex 600n - Yeah bring it on!!!!
        Hyper 50 engine
        Align GP750 Gyro w/9254
        Futaba FF7 Tx 2.4 jobby now
        Flying since May 2006. Crashes so far: 2 and the 2nd was a fatal one!

        Comment


        • Having a lay in on Sundays is mandatory

          Comment


          • Quick Question before I spray the grey later.

            Did you want the white grey split on the side pod insides, or would you like them the same as Jimbobs (Orange I think they were) Maybe Jimbob could take a quick piccy of the area and post a piccy so you can have a proper look etc.
            Trex 600n - Yeah bring it on!!!!
            Hyper 50 engine
            Align GP750 Gyro w/9254
            Futaba FF7 Tx 2.4 jobby now
            Flying since May 2006. Crashes so far: 2 and the 2nd was a fatal one!

            Comment


            • Mark

              Please just do them Grey/white split

              I prefer that to the Orange


              Cheers

              Comment


              • no worries will do, just wanted to double check before I start masking it all out.

                Should hopefully have some more piccies later today maybe even some with the grey paint on
                Trex 600n - Yeah bring it on!!!!
                Hyper 50 engine
                Align GP750 Gyro w/9254
                Futaba FF7 Tx 2.4 jobby now
                Flying since May 2006. Crashes so far: 2 and the 2nd was a fatal one!

                Comment


                • Thanks very much a piccie or two would be great


                  Cheers

                  Comment


                  • Rightly oh!

                    It's Ciggy break, so thought id take a couple of snaps of the heli as im masking out the main lines etc (wouldnt believe how many times you readjust the tape as you go along lol!)
                    Attached Files
                    Trex 600n - Yeah bring it on!!!!
                    Hyper 50 engine
                    Align GP750 Gyro w/9254
                    Futaba FF7 Tx 2.4 jobby now
                    Flying since May 2006. Crashes so far: 2 and the 2nd was a fatal one!

                    Comment


                    • Looking good

                      Comment


                      • ok piccy time again.
                        2 pics to show how the grey shows in different light angles.

                        Once the Laquer is on, that will deepen the grey down more.

                        Still got some touchups to do, as per usual in a couple of places got a tiny bit of paint creep and also lifted some of the white too, but should all be done probably tomrrow as will let the paint go off totally before touching up.
                        Attached Files
                        Trex 600n - Yeah bring it on!!!!
                        Hyper 50 engine
                        Align GP750 Gyro w/9254
                        Futaba FF7 Tx 2.4 jobby now
                        Flying since May 2006. Crashes so far: 2 and the 2nd was a fatal one!

                        Comment


                        • Looking very smart,nice work

                          Comment


                          • nothing new ? no pictures ?

                            Comment


                            • hehe not at the mo,

                              I just had to touch up a couple of bits but now its back with Wayne for the Laquering, so next pics will be when its all shiney.
                              Trex 600n - Yeah bring it on!!!!
                              Hyper 50 engine
                              Align GP750 Gyro w/9254
                              Futaba FF7 Tx 2.4 jobby now
                              Flying since May 2006. Crashes so far: 2 and the 2nd was a fatal one!

                              Comment


                              • Wayne has just kindly sent me this pic of the finished article




                                It looks spot on to me,,well done to both of you

                                Comment

                                Working...
                                X