Talking Ball'Links!

[Cuppa]

I have at last rebuit my 700 £££s later, and av just spotted that i have had my Beast X set in "j" cyclic controle loop, light showing puple not blue @ 6 degrees, flys fine though, iam sure i've seen a thred talking about this (can't fined it now) I am running the servo horns on the inside hole, aile and ele levers are stock 700n, so if i want to get more resolution between cyclic servos and swash this could be arrived at by using shorter balls, i.e ele lever ones, on the bottom swash ring rather than the longer stock ones. i am thinking that this would give a little more servo travel to get to the pitch required and so give me the magic blue light at 6 degrees
Am i barking up the wrong tree? Woof Woof!

[Gaza07]

I think quite a few people have the same problem mine was like this and it flys fine,
The geezer in the setup vid thats kicking about also said it shouldnt be a prob as long as the beastx knows where 6 degrees is

[Cuppa]

Yep c'n it bud my beasty700 is on the table in front of me so just going to see how much differance it will make in set up, i'm getting red at 6 now and 6.5-7 when showing blue can't be far out, may be a while!
Noop not good balleyes strike swash at full throw worth a try spose

[Cuppa]

I have at last rebuit my 700 £££s later, and av just spotted that i have had my Beast X set in "j" cyclic controle loop, light showing puple not blue @ 6 degrees, flys fine though, iam sure i've seen a thred talking about this (can't fined it now) I am running the servo horns on the inside hole, aile and ele levers are stock 700n, so if i want to get more resolution between cyclic servos and swash this could be arrived at by using shorter balls, i.e ele lever ones, on the bottom swash ring rather than the longer stock ones. i am thinking that this would give a little more servo travel to get to the pitch required and so give me the magic blue light at 6 degrees
Am i barking up the wrong tree? Woof Woof!

I'm not barking mad, thay allways say that! think i may have sorted it by swaping the 'A' arm (nitro) with 'A'arm lever 'E' (two holes) what do you think crack'd it or crack'd up!