power loss

[moonmanflyer]

Thats hell of a wag, check all the mechanicals again and make sure nothing is binding

[Adrian]

mmm that carbon rod that controls the tail dident bend did it with the old servo on? now with the new one on ..it does! thats the only thing i can think

[pchristy]

Well i turned the needle to +3 turns out and bingo we have power.

That sounds like a restriction or dirt in the main jet!

Have you cleaned it all out, thoroughly? If all else fails, blow it through with WD-40!

I've known slight burrs on the fuel input nipples to cause silicone shavings from the fuel tubing to float up into the jets before now!

--
Pete

[Adrian]

That sounds like a restriction or dirt in the main jet!

Have you cleaned it all out, thoroughly? If all else fails, blow it through with WD-40!

I've known slight burrs on the fuel input nipples to cause silicone shavings from the fuel tubing to float up into the jets before now!

--
Pete

Had a go at cleaning it,no obvious bits ect to effect it....still got the wagging thing going on though gonna knock it on the head tonight b4 next door complains about nitro smoke choking them