Announcement
Collapse
No announcement yet.
Thanks Midlands (and what have I done)
Collapse
X
-
Ooooo, you had to do it, point me like a hunting dog at the target. So, I went and I looked and I found that the Align 600efl is designed to take two of the batteries that lurk in my 500efl. You flippin' devil!!!! (Psst: thank youOriginally posted by JoeBailey View PostYou could do a 12s fusion 50 with 550 blades using those 3000 packs vikki.
And with a 90 size motor it really would go like stink.
).
Comment
-
I can see now the collateral damage this thread is leading too :-). 500 owners to 600 and 550 to 700 ;-)Originally posted by Vikki View PostOoooo, you had to do it, point me like a hunting dog at the target. So, I went and I looked and I found that the Align 600efl is designed to take two of the batteries that lurk in my 500efl. You flippin' devil!!!! (Psst: thank you
).Gaui R5 + 14S + Tribunus 200 + Scorpion 4530/540 + Bavarian Demon Axon
Gaui X3L + Bavarian Demon 3SX
Jeti DS-16, Citizen 625
iMac + AccuRC =
Member of East Fortune Aeromodellers
Jeti Sensors and Apps: https://github.com/AlCormack
Comment
-
Hi, 3000's would be no good on the 550 as you will never get the heli to balance properly.Originally posted by Vikki View PostThat's your garden! Wow!
The battery path puts me off too. How many minutes, I wonder, would 3000mAh give me on a 550. Will have a look at 5000mAh costs later.
Even with 5000's its not perfect. I think it was Tye at PMHC who had to put about 160g of lead in the nose of his, or it might of been Ronnie??
Nice one Alastair btw
Last edited by Jamin_00; 28-09-2012, 07:44 PM.
+ 7 x Eddies finest EGS's
Comment
-
-
Just strap the 600 to the back and go idle up!Originally posted by Vikki View PostSince I go flying with my bicycle ( ok, that sounded strange). Since I pack my flying gear on to my bicycle and cycle to the flying field I'd have a job fitting a 600 on my bike.
howeverrrrrrr, fitting bike wheels on a 600.......
61696403-its-flying.jpgGaui R5 + 14S + Tribunus 200 + Scorpion 4530/540 + Bavarian Demon Axon
Gaui X3L + Bavarian Demon 3SX
Jeti DS-16, Citizen 625
iMac + AccuRC =
Member of East Fortune Aeromodellers
Jeti Sensors and Apps: https://github.com/AlCormack
Comment
-
Thanks Ben.. I have some Turnigy nano-techs and they seem to make the COG spot on as long as I don't push them too far back on the tray.Originally posted by Jamin_00 View PostHi, 3000's would be no good on the 550 as you will never get the heli to balance properly.
Even with 5000's its not perfect. I think it was Tye at PMHC who had to put about 160g of lead in the nose of his, or it might of been Ronnie??
Nice one Alastair btw
Gaui R5 + 14S + Tribunus 200 + Scorpion 4530/540 + Bavarian Demon Axon
Gaui X3L + Bavarian Demon 3SX
Jeti DS-16, Citizen 625
iMac + AccuRC =
Member of East Fortune Aeromodellers
Jeti Sensors and Apps: https://github.com/AlCormack
Comment
-
hey vikki
nice to see you back on forum. why dont you get one of them kids bike trailers that you see about easy to convert to helicopter transport they even have a cover on them to keep them nice and dry. I fly a 550e flybarless using turnigy 5000mah and even though am only doing gentle flying my timers set to 7.30 mins and still land with 30% left in battery not bad for £45 from germany
Comment
-
I am looking at a trailer but I need to be sure it will go through some restrictions on my route. I've checked the width of my trike and it goes through ok so I need one less than that. It also needs to go on my trike and my bike. Problem: Trike would fit to rear wheel quick release but can't on the bike since the motor is on the back wheel so would connect to the seat stem. I'll see what I can sort out
Comment
-
Ok so I got some time at the weekend to get out to the field and fly the 550 in open space. It was the usual 10-15mph wind up here and with this heli I did not even notice. No issues at all for this flight. Put two packs through and a couple of mins into the first one it was so easy to fly and the size factor disappeared(ish). Love it!
Only thing I noticed was if I did a pitch pump it was slower to move upwards than my 450 pro (running the 550 at 2250rpm governed). Maybe I need to tweak the 3GX a little. Have to do some research and playing with parameters.
Anyways just a little video (8's not a clean as normal as was using too much rudder and still a bit chicken flying this)
Gaui R5 + 14S + Tribunus 200 + Scorpion 4530/540 + Bavarian Demon Axon
Gaui X3L + Bavarian Demon 3SX
Jeti DS-16, Citizen 625
iMac + AccuRC =
Member of East Fortune Aeromodellers
Jeti Sensors and Apps: https://github.com/AlCormack
Comment




Comment