Announcement

Collapse
No announcement yet.

Jr dsx 9 ii, diy throttle stick throw mod

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jr dsx 9 ii, diy throttle stick throw mod

    What i did was make my own wedges to reduce the throw on the throttle.
    i used 1.5 mm carbon trex 600 tail fin to be precise,
    cut this into 25mm by 5mm rectangle drill a hole bag in the centre.
    then place them in the spaces above and below the throttle mechanism as you will see the holes are already there to screw them down.
    i used the two screws from inside the tx right at the top they don't seem to be holding much and i dint have any that fit lol,see picture.

    go into the service menu and recalibrate the throws here is the link to do that it is easier than you think just read this info carfully and exit the menu how he suggests
    JR 9XII service menu - RC Helicopter Wiki
    Edit: as pointed out by turbod you have to turn on reduced throttle in the service menu before you calibrate the sticks.
    cheers
    lee
    Attached Files
    Last edited by lee mister; 07-09-2011, 10:18 AM.
    protos maxv2
    TREX 700e DFC DOMINATOR
    RC HELI NATION
    CITIZEN NO
    278



  • #2
    bang tidy that mate.!!!
    you can do mine one day!!
    sigpic

    Comment


    • #3
      I did this to my DSX9 when i heard mcgregor wanted £50.00

      I used the spacers out of a DX7

      You also have to turn on reduced throttle in the hardware configuration menu before recalibrating the sticks

      Comment


      • #4
        Busterboy was looking to do this on his Dx8.
        I bet there the same.
        Cheers Paul

        sigpic
        Citizen #42

        Comment


        • #5
          Originally posted by Geek View Post
          Busterboy was looking to do this on his Dx8.
          I bet there the same.
          The DX8 already has the wedges for reduced throw.
          Last edited by flatspins; 06-09-2011, 10:31 PM. Reason: Post was grammaticaly incorrect
          Align T-Rex 600n Pro (Now with 3GX)
          Align T-Rex 500CF(Gone)
          Align T-Rex 450 Pro
          T-REX 250, had it since crimbo(bloody tail) want to smash it with a hammer
          T-Rex 700......STUNNING (Thirsty) (Now with 3GX)

          No plank flyers were hurt whilst making this post

          Comment


          • #6
            Originally posted by flatspins View Post
            The DX8 already has the wedges for reduced throw.
            I know but Tim was looking for some more.
            He contacted me because on a old dx8 gimbal I had removed mine to make a bigger throw because I didn't like the short throw for smooth flying.
            Cheers Paul

            sigpic
            Citizen #42

            Comment


            • #7
              I didn't know about the reduced throttle option I will re do mine later thanks for that, seemed ok on Sunday though but I will be doing it anyway.
              Originally posted by turbod View Post
              I did this to my DSX9 when i heard mcgregor wanted £50.00

              I used the spacers out of a DX7

              You also have to turn on reduced throttle in the hardware configuration menu before recalibrating the sticks


              Sent from my HTC Desire using Tapatalk
              protos maxv2
              TREX 700e DFC DOMINATOR
              RC HELI NATION
              CITIZEN NO
              278


              Comment


              • #8
                You know I will, bring it with you next time I can do it then
                Originally posted by heliward0 View Post
                bang tidy that mate.!!!
                you can do mine one day!!


                Sent from my HTC Desire using Tapatalk
                protos maxv2
                TREX 700e DFC DOMINATOR
                RC HELI NATION
                CITIZEN NO
                278


                Comment


                • #9
                  What is the advantage of doing this mod??

                  sigpic
                  RCHA - Guinness World Record Pilot 2011/12/13 Central Model Helicopter Club
                  Some helis were damaged during the making of this signature.....

                  Comment


                  • #10
                    if you fly a dsx9 transmitter you will/should of noticed the deadness around mid stick.. this mod gets rid of that and makes the mid stick more controllable..in other words it makes the DSX9 PERFECT!!!
                    sigpic

                    Comment


                    • #11
                      yep i do fly with a dsx9, but have not noticed a dead area...

                      sigpic
                      RCHA - Guinness World Record Pilot 2011/12/13 Central Model Helicopter Club
                      Some helis were damaged during the making of this signature.....

                      Comment


                      • #12
                        TRY A DX7 OR EVEN A DX8.. Far more controlable around mid stick..
                        sigpic

                        Comment

                        Working...
                        X