Spin Blade Problem

[heliharry]

dampers were fine after a bit of tweaking they came in track thats all the probs we had tracking but on the 600 we had to up the swash mix but that is flybarred

[Asid]

Different blades have a different affect on the control loop. As with all FBL systems you must adjust the FBL loop (gain etc) when changing blades

As already said 12 oclock is not default. That is too high. 9 oclock is default.

Check balance of blades.

[Mslater]

Different blades have a different affect on the control loop. As with all FBL systems you must adjust the FBL loop (gain etc) when changing blades

As already said 12 oclock is not default. That is too high. 9 oclock is default.

Check balance of blades.

I've not adjusted it - I'll have another look when I get home.

[Made2Fade]

Mark what the guys are saying is definately your problem mate, just to clarify even further

[ade999]

9 o'clock is factory default for all 3 pots.. please adjust this back to this and fly and adjust.

[Made2Fade]

im guessing it depends what way you have it mounted and how YOUR looking at the unit, maybe your actually already at 9'0clock if you havent touched it Mark? In that case then id go with mis-matched blades (balance/cofg) or dampners.