Can anybody help?

[mattie-lodge]

Hi Guys,

I need to make up a Y-lead for a Trex 700E to connect two 6s 5000mAh packs in series..

I need to get hold of some 8AWG silicone wire to do this.

Does anybody know where I can get some in the UK?

Thanks in advance

[DarkTherapy]

Use anderson power poles then you wont need to make up a series cable

[Swashbuckler]

Got 5" of 10AWG spare for you Mattie if that's any good?

[sacko]

HobbyKing Online R/C Hobby Store : Turnigy Pure-Silicone Wire 8AWG (1mtr) RED

[Baldie]

8 AWG Gauge Power Cable Leads 3 meters long on eBay (end time 15-Oct-10 22:52:35 BST)

Any good?

[Swashbuckler]

Or Maplin

Cables : Cut Cable : Automotive Cable : Maplin Electronics

[Geek]

Lesro models
If they are still going
You Should be able to pop in on the way home

[mattie-lodge]

Guys,

Thanks for your help here. Really appreciated.

ChrisB has come to the rescue and is dropping some in tonight.

Thanks again chaps

[Andy from Sandy]

As a suggestion, if you take the positive lead of the esc to one connector and then connect the two connectors and then connect the negative of the esc to the other side of second connector you will eliminate one connector and it makes for a tidy installation. You might want to draw a picture to visualise what I have written and make sure of getting the + and - the right way round.

[Paulo uk]

As a suggestion, if you take the positive lead of the esc to one connector and then connect the two connectors and then connect the negative of the esc to the other side of second connector you will eliminate one connector and it makes for a tidy installation. You might want to draw a picture to visualise what I have written and make sure of getting the + and - the right way round.

Would you draw a diagram cos that went over my head but I am interested!

Paul

[Andy from Sandy]

I hope this makes sense?

[mattie-lodge]

Thanks Andy, got a feeling with the length or wire I have on the esc it's not going to meet the lipos hence the reason for the Y lead.

[Spanner]

Salvador Dali would be proud!

[Kozmyk]

Chunky Diagrams R Us

[Bruinbear]

Dame it ! Just found a few links for you and then came back and read the whole thread. That will teach me.
I guess you're sorted then ?
There's just too much help on here !
Mike.