I'm in the process of converting from 35 mhz using a Futaba T7CP to 2.4ghx using a FF7, the TX's are identical, except for a couple if settings the FF7 has like Governor settings & Swash-TH and I have copied the settings over exactly as they are in the T7CP, and all is well except the gyro is not going into HH mode, it's flashing as in rate or normal mode, what's wrong please?
Announcement
Collapse
No announcement yet.
Unable to get solid led on 401
Collapse
X
-
-
you tried reversing the channel ??? .. personally I disable the gyro menu and use the endpoints for the gyro as it is easier ...I meant the gyro settings in the tx as in swop them about set both to 50 and then turn it on and try .. if it does it put the switch the other way and try again ... that way you know if it wants swopping
Comment
-
No trim or sub trim set, my tx settings are as per the 35mhz set as:
Gyro (SW-E)
UP N 80%
CT N 77%
DN N 75%
As setup by a Raptor wizzard I'm told !
Reverse Channels are exactly the same in both TX sets.
Thanks.L̶y̶n̶x̶ ̶3̶8̶0̶X̶L̶ -
Black Hawk (Helipro) 450
Blade mSR
Blade 130X
Trex 450 SE
R̶a̶p̶t̶o̶r̶ ̶5̶0̶ ̶T̶i̶t̶a̶n̶ -
Trex 600 LE
Trex 500- crashed pondering repair !
+ Planks too I'm afraid ......
sigpic
Comment
-
you could disable the gyro menu and use endpoints ... go in parameters and choose which switch you want to use for channel 5 and then go into endpoints and put them both to 50 ... now turn on the set and gyro and see if it goes solid red .. if not reverse the channel and try again ... hope this helps .... I use the FF7 2.4 as well :
Comment
-
Try switching your transmitter on first and move away from your heli leave it about 20sec before you switch your heli on. this is what i have to do using my spektrum dx7, it's somthing to do with the hand shake time. Hope this is of help to you.Avant Aurora 90, ys powered
Avant Aurora Ys120 V bar
Rave Env Ys120 true power Beast X
pheonix sim
Dji s800
Comment
-
Thanks all, I have trouble trying to work out how to move from the left end point to the right one Mike, how do I select the right hand side setting ?L̶y̶n̶x̶ ̶3̶8̶0̶X̶L̶ -
Black Hawk (Helipro) 450
Blade mSR
Blade 130X
Trex 450 SE
R̶a̶p̶t̶o̶r̶ ̶5̶0̶ ̶T̶i̶t̶a̶n̶ -
Trex 600 LE
Trex 500- crashed pondering repair !
+ Planks too I'm afraid ......
sigpic
Comment
-
Thanks Paul, but that only seems to work for some of the channels and it's the aileron stick, and does not work on Ch5 for the Gyro, I'll look at the manual in the morning, unless anyone knows why?L̶y̶n̶x̶ ̶3̶8̶0̶X̶L̶ -
Black Hawk (Helipro) 450
Blade mSR
Blade 130X
Trex 450 SE
R̶a̶p̶t̶o̶r̶ ̶5̶0̶ ̶T̶i̶t̶a̶n̶ -
Trex 600 LE
Trex 500- crashed pondering repair !
+ Planks too I'm afraid ......
sigpic
Comment
-
no need to move the sticks .. flick the switch the other way ... any of the switches or sticks to get the endpoint to go to other side is either move it or flick the switch over ... hope this helps
channel 5 is gyro gain and you dont need to set enpoints with your sticks ... if you need help going through it pm me and I will give you my phone number and talk you through it ....
Nigel .. its a futaba system and not a spekky
Comment
-
Originally posted by Delta7 View PostNo trim or sub trim set, my tx settings are as per the 35mhz set as:
Gyro (SW-E)
UP N 80%
CT N 77%
DN N 75%
As setup by a Raptor wizzard I'm told !
Reverse Channels are exactly the same in both TX sets.
Thanks.
The "N" tells me that your Tx is sending rate mode setings. Adjust the Tx values until the "N" changes to "A" which indicates AVCS, now the gyro LED wiill remain solidLast edited by serpent887; 03-06-2010, 08:57 AM.
TRex 500 ESP VBar
Flybarless is more
Comment
-
Spot on Serpent thanks! Battery on charge then off to test !
So it was really easy in the end after this little problem, (I hope) just copied exactly the settings across from the 35mhz TX, and the head movement looks spot on!L̶y̶n̶x̶ ̶3̶8̶0̶X̶L̶ -
Black Hawk (Helipro) 450
Blade mSR
Blade 130X
Trex 450 SE
R̶a̶p̶t̶o̶r̶ ̶5̶0̶ ̶T̶i̶t̶a̶n̶ -
Trex 600 LE
Trex 500- crashed pondering repair !
+ Planks too I'm afraid ......
sigpic
Comment
-
A great couple of flights this morning despite gusting winds, but with a beautiful blue sky it was a delight! All worked as it should and very smoothly too, really pleased! Thanks all for your advice!L̶y̶n̶x̶ ̶3̶8̶0̶X̶L̶ -
Black Hawk (Helipro) 450
Blade mSR
Blade 130X
Trex 450 SE
R̶a̶p̶t̶o̶r̶ ̶5̶0̶ ̶T̶i̶t̶a̶n̶ -
Trex 600 LE
Trex 500- crashed pondering repair !
+ Planks too I'm afraid ......
sigpic
Comment
Comment