Tweet
Hi all am building my outrage velocity and i want to use a lipo and regulator for flight pack.Which are the good ones to use , Don't want to spend fortunes but want something resonable, What is everybody using.
Del.
-
Hi all am building my outrage velocity and i want to use a lipo and regulator for flight pack.
Which are the good ones to use , Don't want to spend fortunes but want something resonable, What is everybody using.
Del.
Velocity 90 FBL Beast x
Outrage velocity 50 nitro,
Beam E4
Futaba 10 CG
-
Hi, I use the align with built in glow, works fine and had no problems.All the best STEVE.
Raptor 50 Kasama head and tail gearbox, OS Hyper, AR 9000, align regulator with glow, csm 560 micro, DS620 on tail.
Raptor 50 csm 560 AR 7000
T-rex 450, Aser Lab D12 MG all round CSM 420
DX7 Phoenix
Proud owner of 1 Eddie Gold Star sigpic -
-
I have been using these for some time now.
Fast Lad Performance
Double input leads from battery. Double output leads to RX. Set the output voltage and away you go.Comment
-
Align 2 in 1 works for me...
Raptor 50 v2 - OS 50 Hyper - Spartan Quark - DS 650 - DX7
Raptor 50 Titan SE - Redline 53 - Spartan DS 760 - DS 650
Mini Titan e325 - Spartan DS 760 - 6100e - Huey Fus
Phoenix
Holder of 2 EGS
Need a DJ? www.soundmachinedisco.co.ukComment
-
And that's the point. They all work else people wouldn't be using them. Fromeco, Duralite, Reactor X, ElyQ, FlightTech, Align, DualSky, etc.Align 2 in 1 works for me
Choose how much you want to spend and what is your level of confidence in a particular manufacturer and go buy it.Comment
-
Originally posted by terryk2000 View PostAlign 2 in 1 works for me...
Got them on all four of my helis,not let me down yet
Comment
-
got one of those on my 700. works really well but only thing I dont like is the fact there is no Deans input.Originally posted by Evo Andy View PostMember of Byley Model Flying Club
Comment
-
fromeco arizona and fromeco lion peerless here... works well and a dual outputs , so no step downs ....Comment
-
Align 2 in 1
Light weight, good reg with the addition of the glow driver.Comment
-
yeah the align 2 in 1 is a great regulator, could't comment on the others but align gets my voteCheers Paul
Avant Aurora fbl
Synergy N9 ys91srs
sigpicComment
-
Using both the 8A flightech and the elyQ
I also will be using a spare flightech when i get round to building my velocity 50
FWIW i use these
Fast Lad Performance
Just to be on the safe side,
AS the connectors have been known to come out..
cheersMARK
Henseleit - Three Dee RIGID V-BAR v5.2
LOGO 500 V-BAR v5.2
GAUI X4ii
PROTOS 500
MINI PROTOS 6S (stretched )
GAUI X3. 6S
JR DSX12
14SG S-BUS
proud owner of 2 x EGS
www.bmmfc.comComment
-
I have the 8A flighttech set to 5.1V, came set to 6.0V as standard. The align unit is 6A and I wanted a little more overhead personally (I also have an on-board glow already).
I use cable ties to keep the plugs from the li-po in place, might well order up some of those clips though very nice solution to the requirement.
Rob
T-Rex 450 Pro - BeastX v3 FBL, Hitec 5065's, DS520, Futaba R6203SB
Quad x-copter - KK 5.5 Multicopter v4.7, 850KVA motors, 30A ESC's, Orange RC FASST Rx, Carbon & Alu frame, LED strips for orientation, 10x4.5 props.
Quad x-copter - KK Plus 5.5d, 1000KVA motors, 30A ESC's, Orange RC FASST Rx, GF & Alu frame, LED strips, 10x4.5 props (coming soon!)
Futaba 9CP & 10CG
Comment
-
-
I also use those clips
Comment
Comment