Another heli-tote idea?

[Jamin_00]

I have a 700 but it is in pieces at the moment getting some well earned maintenance,but I will have a look in the destructions to see if that lists sizes as I do want one for this

[Tom Burgess]

Im doing the 700 and Aurora as we speak. Measurements that is

[Tom Burgess]

Avant Aurora

[trillian]

Sceadu evo 50

The Hirobo Sceadu evo 50;

Total length from nose to end of tailrotor casing 120cm
Height at rotorhead 41cm
Height at front from flybar (also 41cm)
Width of skids (these are small than stock skids) 21cm
Height at top of tailrotor / tailfin 26cm
distance from rotorhead to nose 37cm
height of tail at the bladeholder 37cm
width at the rotorhead 19cm

Since this one is fitted with lower profile skids you could add roughly 3 to 4 cm to all height measurements for stock Sceadu or raptor style skids.

[Tom Burgess]

Trex 700 Nitro

[Mart61]

Thanks Guys - I'll get these over to the maker tomorrow.

[Mart61]

Anyone got the dimensions for a T-rex 600 or 450?

[trillian]

Did you get measurements on a 450 yet? If not I can do that no prob.

'Just to mention, I bought a really cheap golf travel cover on Ebay (for 4.99 how far wrong can you go). This is just a light nylon black cover with a reinforced bit on one end. Anyway, the length is fine but it is not tall enough for a Hirobo Shuttle (and the shuttle is not particularly tall so the same should hold true of most 30/50 nitros).

It would fit something a little shorter and serve as a reasonable dust cover. I haven't given up on the golf travel cover idea because there are variations and perhaps one that is tall enough, but just thought I'd mention, my initial experiment. I think this bag will fit the Gaui 550 because it sits a good bit lower, we shall see, at the very least I do need something to keep the dust off the helis I don't fly all the time.

But there's no comparison to the Plusminuten bag I have (and you'd kinda expect that for 10 times the price).

[Mart61]

Thanks for the info and no, not got the numbers for the 450 yet.

[trillian]

450 dimensions

OK, measurements for the Trex 450 are;

Total length 65.5 cm
Height to rotorhead button 23cm
Height at the bladeholder 20cm
Height at the flybar in front 23.5cm
distance from rotorhead to nose 21.5cm
Width at rotorhead 10cm
Height at tail fin 14cm
Width at skids 13cm