Announcement

Collapse
No announcement yet.

GP700 setup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • GP700 setup

    Hi,

    I have a 600NItro pro with Align GP700 and DS620 servo. How do you set the delay; the light goes gren and red but what delay does this correspond to?

    My heli was fine and smooth then I went into the setup menu to adjust the gain and now it is twitchy on the cyclics (very sensitive) as well as for the tail servo (set to DS).


    any ideas?
    Last edited by chopperboy; 28-02-2009, 07:11 PM.

  • #2
    Set the gain through the gear channel at 65% in heading hold and conventional. Set rudder to 100% and use the gyro to set the end points of the rudder. The red light is conventional mode and the green light is heading hold.

    cheers

    Comment


    • #3
      Delay

      HI there, question edited to say "Delay". How does one set the delay and what to?

      Comment


      • #4
        You do not want any delay, leave the rudder stick in the middle and this will select no delay.

        cheers

        Comment


        • #5
          Bloody hell stu, you have turned over a new leaf and got all technical on us
          James

          Sponsored by
          Align-Trex.co.uk
          Optifuel/optipower
          MKS servotech


          5 Eddie gold stars and christmas star

          Comment


          • #6
            Any idea why my heli is hyper sensitive now - even on the cyclics? I do not know what the delay was before now?


            I have simply set the delay to 0 (centre) and changed nothing else....as far as I can see.

            Comment


            • #7
              from factory settings there is no delay. The gyro wont effect the cyclic response

              Comment


              • #8
                Stu, have you been holding out on us?!!!!
                Pete



                Comment


                • #9
                  I have quit flying now and taken over technical advice managment!

                  Comment


                  • #10
                    I'll believe that when you can spell management LOL !!!!!!!
                    Pete



                    Comment


                    • #11
                      Just testing mr GrAY!

                      Comment


                      • #12
                        Originally posted by StuSmith View Post
                        Just testing mr GrAY!
                        Love you too sweet pants xxxxxx
                        Pete



                        Comment


                        • #13
                          this might help ?
                          http://www.align.com.tw/html/en/assembly/gp700en_2.htm
                          Mike
                          www.RC-Scotland.com

                          T-Rex 700G G270 DS610s GP750/DS650
                          TZ Frenzy .53 Red Line
                          T-Rex 600 .52 ASP
                          T-Rex 600 .80 ASP 4ST

                          Comment


                          • #14
                            [IMG]file:///C:/DOCUME%7E1/SARAH%7E1.ALA/LOCALS%7E1/Temp/moz-screenshot.jpg[/IMG]

                            Hi there,

                            I have the setup doc for the gyro which is helpful in general but it says to set the gyro to the required delay but does not tell you how to do this?

                            Comment


                            • #15
                              IIRC the delay is either 1 or 0 and does not have settings inbetween.

                              it allows the gyro to be used on more sensitive micro helis as well as large 90 class nitros.
                              Mike
                              www.RC-Scotland.com

                              T-Rex 700G G270 DS610s GP750/DS650
                              TZ Frenzy .53 Red Line
                              T-Rex 600 .52 ASP
                              T-Rex 600 .80 ASP 4ST

                              Comment

                              Working...
                              X