If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
what to set the throttle at to strt the helicopter
what to set the throttle at to strt the helicopter
hi can any body tell me what to set the throttle trim and the throttle at on the controller 4 a raptor 30 to start the engine without it trying to kill me
Taort 450 pro v2 fbl
mz18
proud owner of 2 egs
sponsored by :
KBDD International Pilot
hi can any body tell me what to set the throttle trim and the throttle at on the controller 4 a raptor 30 to start the engine without it trying to kill me
Join a club and get help before you do yourself some real harm.
Mine is about 10% open. It's really trial & error. Using the throttle cut shuts the throttle to zero & kills the engine, so I have the trim set centre so I can adjust the tickover and start trim.
You will need to set the tickover and start speed roughly using the end-points and then trim to suit. But try about 10% throttle to start with. Remember to always hold the head firmly as you start. If it's a hot-start you will be able to control the head.
Happy Landings.
David
Winner of SEVEN of the BEST (Eddie Gold Stars)...humbled!
Raptor 50. OS50 Century Bell 47G in Yellow - Beautiful!
Mcpx
Blade 130x
Goblin 500
Comment