If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Hello, im new to this Auto thing, can some one please explain to me how does it work, what is it for, and how do you set it in your Transmitter - what switch is responsible for Auto? Can it be done in DX6i?
Cheers,
Sergey
Fly with the best - Die like the rest !
~~~~~~~~~~~~~~~~~~~~~~~ - T-Rex 600 Nitro Pro
- Raptor 30 v2
- Blade 400 3D
- DX7
Its not auto fly thats the bit you need a sim and loads a time for...
An Auto is the action of flying up to about as far as you can see and stoping the engine...... then applying negitive pitch to speed up the head until you are a few feet from the ground.... then give it loads of positive pitch just before landing.
too early and you loose all the head speed and it krashes....Too late and it drills its way into the floor either way a busted heli...
that is until your engine cuts out then you will have to do an enforced auto,so its best to try and practice beforehand to give yourself a fighting chance
Dont try your first auto on the 500 in real life though.
I tried that one from 15 ish foot, at 3 foot the blades had stopped.
The rest is history and hads been put down to experience (a bad experience)
Martin
Dont try your first auto on the 500 in real life though.
I tried that one from 15 ish foot, at 3 foot the blades had stopped.
The rest is history and hads been put down to experience (a bad experience)
Martin
Cheers Martin, I was talking about Phoenix in which Phil was crashing all the time.
Choose how I try I can't crash the 500 on the sim..
Back to your 500 though what happened to make the blades stop mate..
Comment