Hey as raptor heli says if it is possible it is well worth your while to get the heli checked over by someone it will save you a packet in the long run a properly setup heli will make learning so much easier
Announcement
Collapse
No announcement yet.
Upgrade or buy the Special edition ??
Collapse
X
-
-
hey raptor, how are you pal,
i admit i did take it in the garden again today, but as i said it was not too stable, so i took it in befoer the inevitable happened
Last edited by rob12770; 25-10-2011, 06:53 PM.Trex 450 FBL
Mcpx V2
Foam plane sports Cub S
Spektrum DX6I
Phoenix sim
Tarot 250 Quadcopter
Comment
-
-
yes vanman i have been asking about someone localy to maybe help, i couple of guys on here offered but they are a wee bit away, i found some older chaps here the other day, but i got the impression they were not over keen to help me.. they mostly fly planks and sail boats, but some have heli's, one of them was quite freindlyish tho, so i live in hope
i was meant to go to their club today, but i hate feeling like im not wanted.. if you know what i mean.. i am a freindly sort of chap, and i can never understand when others with the same hobby are not ...
cheers Rob
Trex 450 FBL
Mcpx V2
Foam plane sports Cub S
Spektrum DX6I
Phoenix sim
Tarot 250 Quadcopter
Comment
-
-
Hi again Rob the link you put up for the Swash leveler is fine , but i would take up Raptorhelis offer and get yourself over to his place . He is very experienced and if he gives your Mini Titan the once over you will have piece of mind that it is right and will give you the best chance of success . Again all the best mate . Rob .Rob .
Thunder Tiger X50 Nitro V.Bar . T.Rex 500 Fu.Bar . T.Rex 450 Fly Bar . Blade 130x . Pheonix . Realflight . Seb Art Pitts Python . Seb Art Katana 30 . E.Flite Ultimate 20-300
. Spectrum DX6i & Futaba 8FG Super & SimStick for Futaba . SWRCH .
Comment
-
Right Rob, I am available on Saturday to have a look over your heli. I would suggest you bring it over to Waterfoot and I will have a look there & I will be able to test fly it (or someone will). If Saturday isn't suitable for you I will 100% be at the field on Sunday (so will most guys weather permitting). So there will be plenty of experience about that will have your Mini T flying in no time at all
Oh we dont need a swash leveler as Paul (Raptorheli2) has the best gadge in the work for that
Del
Outrage Velocity 50 N2 FBL, OS55 Powered
-Built and almost ready to fly 
Climb-Out
3D Scotland
Proud owner of 2 EGS
Comment
-
thanks Del, yes, i will make it if i am well and weather is good, if you text me in the morning before you leave, i will text you back to confirm, sorry i cant be more definite considering you are doing me a huge favour, but some days i am too dizzy to go out..
but its been better the last few days so i should be fine mate.
cheers RobTrex 450 FBL
Mcpx V2
Foam plane sports Cub S
Spektrum DX6I
Phoenix sim
Tarot 250 Quadcopter
Comment
-
That's cool mate, either day is not an issue for meOriginally posted by rob12770 View Postthanks Del, yes, i will make it if i am well and weather is good, if you text me in the morning before you leave, i will text you back to confirm, sorry i cant be more definite considering you are doing me a huge favour, but some days i am too dizzy to go out..
but its been better the last few days so i should be fine mate.
cheers Rob
. hopefully we can get you flying and you will be able to enjoy this hobby
Del
Outrage Velocity 50 N2 FBL, OS55 Powered
-Built and almost ready to fly 
Climb-Out
3D Scotland
Proud owner of 2 EGS
Comment
-
All the helis fly tilted to one side a bit - they lean to the right - even full size ones. The tail rotor pushes the tail left (nose right) to stop the heli spinning, so to stop the whole thing going left the heli has to tilt a little to the right.
Its normal for alll helis to have the rotor turn clockwise viewed from above, but there may be exceptions!
fly the heli as it is - buy spares and batteries. not upgrades
www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for real
Comment
-
It is possible to do it all without help, but you need to gathr a lot of info together and understand it. The heli instructions are not enough really.
Take a look at this: Setting up & flying your T-Rex
Written for a trex 450 but you mini titan is very similar.www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for real
Comment

Comment