Announcement

Collapse
No announcement yet.

nitro shopping list.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • nitro shopping list.

    so its now a week away till i order my kit and i want to make sure i have everything in my shopping list bar engine and heli. so if i list everything i have here not manufacturer names or anything just items then people can tell me if i missed out or reccommend summit i might need.

    here goes:
    Transmitter + receiver
    Gyro/Flybarless system
    main blades
    Tail blades and Flybar paddles
    5x Servo (3 cyclic 1 throttle 1 tail)
    1x voltage reg with remote glow ignitor
    1x governor with lcd
    1/2x Rx batt
    1x starter with batt
    1x Muffler
    Hex Drivers and flat and phillips screwdriver
    crank shaft locking tool
    4way wrench/glow driver
    ball link pliers
    ball link drivers
    bubbless clunk/fuel magnet
    fuel line
    fuel clamp
    fuel line bungs
    muffler bung
    fuel filter
    fuel pump
    fuel bottle caps
    FUEL
    after run oil
    hook and loop straps
    cable ties
    double sided sticky/hook and loop pads
    glow plugs
    CA
    red and blue loctite
    grease
    engine + model cleaner
    Field box/bag to carry all your field bits in

    anything im missing on this list?

    thanks luke
    Last edited by porkus; 10-03-2011, 06:39 PM.
    Mini PROTOS fbl Beast X
    TREX 450 Sport
    EFlite Blade MSR
    DX6I tx

  • #2
    rx battery
    exhaust
    fuel
    hex drivers (if you haven't already got some)
    training skids if you're a learner
    tx
    rx
    Hirobo Turbulence D3
    a bunch of bls servo's and a 701 gyro
    Powered by an OS91 hz and a MP2
    Winner of the LHC Scale Cup 2011

    1/4 scale Vario Bell 47 G3
    1/3 scale Vario R22
    2012 LHC Scale Cup Judge
    member of save the flybar foundation
    www.alcesterhelicopterclub.bmfa.org
    sigpic

    Comment


    • #3
      ok cheers. i didnt add muffler as im getting that with kit but ill add everything to the list and maybe would could have it for reference for beginner like myself.
      Mini PROTOS fbl Beast X
      TREX 450 Sport
      EFlite Blade MSR
      DX6I tx

      Comment


      • #4
        gyro, cleaning agent (soapy water spray) tail blades. paddles depending on what nitro kit your buying.
        Troll buster
        sigpic

        Comment


        • #5
          you need the God of Gravity on your side
          Steve - Instructor and builder for the Paul Heckles school of flying

          TREX 600NSP - Raptor 50 Titan - Trex 500ESP - (Dark Side) 50cc EG MXsR - 50cc 3D hobbyshop Extra 300SHP - 363 Delta - Magnum R
          Futaba 12FG, Phoenix sim and some BMFA Certs

          Comment


          • #6
            You listed a 4-way spanner... frankly I prefer the standard long handled glow driver..easier to access some heli types with it...cheap enough. Add cable ties, double sides sticky?. For greases/oil triflow brand is the best all-rounder but some heli type tail boxes do better on lithium grease..
            PGK
            450Pro Clone fb, Trex500 fbl beastx, Trex 600N fbl beastx, Trex700N fbl msh brain, Spectra G Hanson 26 3dmax fb, Blitz Avro fb...Futaba 8FG

            Comment


            • #7
              Ball link pliers and ball link drivers will come in handy.

              I can't think of many kits that you are likely to be buying that come without tail blades or paddles and some come with blades as well, so do check to make sure you don't duplicate. (spares are always handy though)

              Comment


              • #8
                thanks to all the replies so far i am editing the list at the top with the suggestions aswell so it is all in one list
                Mini PROTOS fbl Beast X
                TREX 450 Sport
                EFlite Blade MSR
                DX6I tx

                Comment


                • #9
                  bubbleless clunk
                  Hayes clunk pipe
                  after-run oil
                  another rx batt [LiPo or NimH]
                  something to carry all this cr4p in !!
                  Mike
                  TRex 600NSP, OS55, MicroBeast
                  TRex 500ESP
                  TRex 450Sport,TT, Scorpion 2221/8,
                  Futaba 14SG Optifuel 20%
                  Member RCHA BMFA BMAC BALPA BARC

                  Comment

                  Working...
                  X