so its now a week away till i order my kit and i want to make sure i have everything in my shopping list bar engine and heli. so if i list everything i have here not manufacturer names or anything just items then people can tell me if i missed out or reccommend summit i might need.
here goes:
Transmitter + receiver
Gyro/Flybarless system
main blades
Tail blades and Flybar paddles
5x Servo (3 cyclic 1 throttle 1 tail)
1x voltage reg with remote glow ignitor
1x governor with lcd
1/2x Rx batt
1x starter with batt
1x Muffler
Hex Drivers and flat and phillips screwdriver
crank shaft locking tool
4way wrench/glow driver
ball link pliers
ball link drivers
bubbless clunk/fuel magnet
fuel line
fuel clamp
fuel line bungs
muffler bung
fuel filter
fuel pump
fuel bottle caps
FUEL
after run oil
hook and loop straps
cable ties
double sided sticky/hook and loop pads
glow plugs
CA
red and blue loctite
grease
engine + model cleaner
Field box/bag to carry all your field bits in
anything im missing on this list?
thanks luke
here goes:
Transmitter + receiver
Gyro/Flybarless system
main blades
Tail blades and Flybar paddles
5x Servo (3 cyclic 1 throttle 1 tail)
1x voltage reg with remote glow ignitor
1x governor with lcd
1/2x Rx batt
1x starter with batt
1x Muffler
Hex Drivers and flat and phillips screwdriver
crank shaft locking tool
4way wrench/glow driver
ball link pliers
ball link drivers
bubbless clunk/fuel magnet
fuel line
fuel clamp
fuel line bungs
muffler bung
fuel filter
fuel pump
fuel bottle caps
FUEL
after run oil
hook and loop straps
cable ties
double sided sticky/hook and loop pads
glow plugs
CA
red and blue loctite
grease
engine + model cleaner
Field box/bag to carry all your field bits in
anything im missing on this list?
thanks luke


and some BMFA Certs
Comment