suggestions please

[challis349]

maybe try turning the gain down a bit, what is it set at at the moment for hh

edit: damn, beat me to it lol

[supamansuper]

Gain is at 68%

[challis349]

i would try turning it up, how I do it is keep turning the gain up until the tail starts to wag while stationary hover, then turn it down a little until it stops wagging, on my dx6 and kds800 gyro, gain is set at 92% on tx, not saying yours will be that high, but thats how I do it

[supamansuper]

Was scared of putting it to high.cheers will try once batteries charge

[challis349]

dont get scared, put it up bit by bit, it will be fine, then if it starts to wag then turn it down a touch, and see if that is better for your tail kicking

[supamansuper]

tried the gain which worked a little,could it just be down to it no being a digital servo?

[challis349]

I dont know that one, one of other lads maybe able to help with that, I use a Align ds520 on my tail which comes with the 500 kit on my 450, and that is pleanty fast enough, where possible its always a good idea to have a decent servo on the tail, what servo is it?

[supamansuper]

its just the cheap one that came with the flasher 450.going to buy a hitec one on monday give that a go

[trillian]

In fact Finless is now standing up and saying that you CAN use sub trim for when you can't get that dead 90° by positioning alone.
Apparently, when you next power-up the gyro will see your sub-trimmed setting as centre stick.
http://video.helifreak.com/?subpath=...=tailservo.wmv
He says this at 1'30" to 2'40"

This would depend greatly on the gyro.