Announcement

Collapse
No announcement yet.

Spartan DS760 Problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Spartan DS760 Problem

    Hi Guys I got a really strange problem with my DS760 Spartan on my Logo 400 with Align DS520 Tail.

    More often than not the tail will not initialise properly. The gyro seems to function (blue light on at centre stick and flashing with rudder input) but the tail servo is dead no movement at all.

    90% of the time it is like this 10% of the time the tail servo will function properly.

    One thing I have noticed is that if I fire her up, the tail servo is dead, yet if i unplug the tail servo and then replug it in the tail servo fires up and behaves fine. It does this every time, unplug and replug = working tail.



    Wtf?

    Help!

    Butuz
    Attached Files
    Heli 1: Mikado Logo 400 3D
    Heli 2: RCer Dragonus 450
    DX7SE / Cellpro 10s Keeping me in the air!!!
    Gaer Park Model Flying Club

  • #2
    you tried a different tail servo with that gyro and vice versa ? ... might let you narrow it down to which one is playing up then
    Knight 3D
    http://northeast3d.talkheli.co.uk/
    http://www.lindensflyingclub.co.uk/

    Comment


    • #3
      Are you using a spektrum reciver as they have had problems on the older gyros ??
      Oxy4+, tgy servos, hw60a, spirit fbl on 6s 🤓


      sigpic - Team pilot

      Comment


      • #4
        Try doing a rebind,see if this helps.
        + 7 x Eddies finest EGS's


        Comment


        • #5
          Just a thaught ... Have you tried putting a servo pulse checker on the output to ensure that the pulse is present just to ensure that a pulse is coming from the gyro (proof of poor connections

          Steve
          Steve...

          Outrage RC Field Rep


          Now enhanced with some more EGS's....

          Comment


          • #6
            Hey guys cheers for the input. Sat down and read the manual and came across the bit about spectrum users should re-bind with a small amount of rudder input given. Tried this, and now it works fine. I guess the old AR6200 takes too long to boot up for the gyro, doing this it works fine now every time.

            Very happy!

            I guess there's something to be said for reading manuals after all!!!

            Butuz
            Heli 1: Mikado Logo 400 3D
            Heli 2: RCer Dragonus 450
            DX7SE / Cellpro 10s Keeping me in the air!!!
            Gaer Park Model Flying Club

            Comment


            • #7
              Originally posted by Butuz View Post
              Hey guys cheers for the input. Sat down and read the manual and came across the bit about spectrum users should re-bind with a small amount of rudder input given. Tried this, and now it works fine. I guess the old AR6200 takes too long to boot up for the gyro, doing this it works fine now every time.

              Very happy!

              I guess there's something to be said for reading manuals after all!!!

              Butuz
              My understanding newer Firmware thats not needed!?
              WHat firmware you using ?
              sigpic

              Comment


              • #8
                On the spartan? V2.00

                Butuz
                Heli 1: Mikado Logo 400 3D
                Heli 2: RCer Dragonus 450
                DX7SE / Cellpro 10s Keeping me in the air!!!
                Gaer Park Model Flying Club

                Comment

                Working...
                X