Announcement

Collapse
No announcement yet.

What Gasser?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Fixer:
    Well I hope its sorted now. Updated? Well not always a bad thing. Was the prices nasty or not to bad?

    I have had to turn down a Raptor titan and I really don't want to but no choice.

    Seen this and cannot afford it either:

    http://cgi.ebay.co.uk/Century-Predat...QQcmdZViewItem

    Sometimes its never good to look around at all the toys is it
    Mark
    www.uavaerialservices.co.uk
    BNUCs - Operations certified
    CAA - Permit for Aerial Work

    Comment


    • #47
      Disc

      The parts I bought are listed below

      Boom
      Drive shaft
      Blades £117
      Flybar
      Front Skid
      O rings for Blade Grips
      13mm Swash tool £11
      Top Gear set £40
      Total £250

      Yes I think the bill was nasty but I made my own bed so to speak.
      I’ve also got my eye on the Predator on eBay but like you I can’t afford it unless I sell a PC in the next few hours.

      Any chance you could help me out with this question?
      http://www.rcheliaddict.co.uk/showth...?t=2188&page=2
      Last edited by Fixer; 11-10-2006, 09:44 AM.

      Comment


      • #48
        You could convert mine (see classifieds) into a gasser, so I'm told - I know nothing about gassers

        Cheers,
        Rob
        Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

        | 3D Championship

        Comment


        • #49
          Originally posted by Fixer
          Disc

          The parts I bought are listed below

          Boom
          Drive shaft
          Blades £117
          Flybar
          Front Skid
          O rings for Blade Grips
          13mm Swash tool £11
          Top Gear set £40
          Total £250

          Yes I think the bill was nasty but I made my own bed so to speak.
          I’ve also got my eye on the Predator on eBay but like you I can’t afford it unless I sell a PC in the next few hours.

          Any chance you could help me out with this question?
          http://www.rcheliaddict.co.uk/showth...?t=2188&page=2
          Main blades Cost way to much! I'd be looking for an alternative from them you should get away with a diffrent make! The day my Rotortechs die I won't buy again i'll look at another make. Rotortechs are about 100 a pair as well!

          Not had that problem and mine won't seek at all it kind of just Flys..... Ade is the man for that I still fly without any type of gov at all. no heli has one fitted
          they seem to be a bugger to fiddle with and I prefer the simple life so why I fly Helis I have no idea!
          Last edited by Disc; 11-10-2006, 11:22 AM.
          Mark
          www.uavaerialservices.co.uk
          BNUCs - Operations certified
          CAA - Permit for Aerial Work

          Comment


          • #50
            Disc
            Main blades Cost way to much!

            Well the SAB 810 is an alternative recommended but they cost £95, I guess the extra 10mm in length makes up for the fact there not wide core blades.
            The V Blade is another at £185.

            Comment


            • #51
              Bloody hell they are cheap then!

              810 Blades okay thats a lot more than my poor 720s....

              No wonder they cost so much!
              Mark
              www.uavaerialservices.co.uk
              BNUCs - Operations certified
              CAA - Permit for Aerial Work

              Comment


              • #52
                Originally posted by robgt
                You could convert mine (see classifieds) into a gasser, so I'm told - I know nothing about gassers

                Cheers,
                Rob
                That’s a nice looking canopy you have there, it would be cheaper to buy a new gasser than covert yours I think

                Comment


                • #53
                  Thanks
                  Honestly, the whole heli is lovely!
                  If you're interested... make me an offer?

                  Cheers,
                  Rob
                  Team Align, Midland Helicopters, Optifuel, Cyclone Blades, Scorpion Motors, Thunder Power, Savox Servos, JR Propo

                  | 3D Championship

                  Comment

                  Working...
                  X