Twister 3D vibration

[wang_uk]

Hello people. I have a twister 3D that has a lot of vibration in a hover or flying around. Now the blades are a bit of a state but any other idea's what might do this?

Cheers
Stefan

[Kwickkwack]

Hi Stefan

have you crashed it at all, if so are you sure the main shaft is not bent?

[Disc]

Hello people. I have a twister 3D that has a lot of vibration in a hover or flying around. Now the blades are a bit of a state but any other idea's what might do this?

Cheers
Stefan

Check main shaft isn't bent then buy some new blades.

[wang_uk]

Just had the bar out and it's straight. guess new blades it is!!

[Kwickkwack]

Wang, If you mean the Flybar, the main shaft may still be bent, double check

[Gaza07]

Spin the head round by hand and look at the swash plate if it wobbles your main shaft is bent and deff dont fly with damaged blades not just because of the balance but your own safety and any others that may be near you

[Twister3D]

Hey Guys one other thing to look at is the blade tracking.
mine used to wobble before I got that right, once they were aligned it was fine.

Twister

PS: Wang you didnt answer if you had crashed or not, if you have it could be the feathering spindle is bent, that makes it wobble like crazy

[wang_uk]

sorry been a little busy. Well i purchsed it second hand and it's only 3 months old on the recipt but it had a hard life finding the floor. So i havent crashed it.

I have sorted the blade tracking and still no joy. back to Raptor for the time being untill i order the blades as no shops have them at the moment.

I have a few spare main shafts so il replace it too. Cheers all

[Kwickkwack]

Try A1 Models for blades, I never have any trouble
01206 572094, Dave will sort you out

[wang_uk]

Thank you!! :-) il give him a ring