Twister Skylift V2 - help replacing rotor hub

[tourerjim]

Thanks Brian.

I'll check those out.

But I've found my problem.

Even though the shafts were bent previously - the flybar was also slightly out of shape.

I put that right and the Heli seems fine again.

Cheers!

Tris

Are you running on 35 or 2.4 as Im going to convert mine to 2.4 but need to know wiring config.

[Brian Gifford]

Thanks Brian.

I'll check those out.

But I've found my problem.

Even though the shafts were bent previously - the flybar was also slightly out of shape.

I put that right and the Heli seems fine again.

Cheers!

Tris

Brilliant! pleased you are flying again.

[Brian Gifford]

Are you running on 35 or 2.4 as Im going to convert mine to 2.4 but need to know wiring config.

I don't know if it's any use, but I've just converted my lama to 2.4, controlled by my DX6i. Have a look at my blog. If I can help any further, PM me.

[TristanC]

Are you running on 35 or 2.4 as Im going to convert mine to 2.4 but need to know wiring config.

Standard 35 meg mate. Sorry.


Another query about trimming. this time.

I've got it hovering quite nicely now - but I'm finding that when I give it some forward, it dips down and to the left, instead of just dipping forward.

Same when it goes backward - it dips back and to the right. (When looking at the heli from behind).

I expect there's some linkage adjustment to be made - but being a total novice here - I'm not sure what to change...


Thanks again

Tris