Announcement

Collapse
No announcement yet.

Advice needed please..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by Ksanderz View Post
    heliTV, I am having so much fun, like a kid in a toy shop.
    Sounds like you're well on the way to being addicted!
    Blade 400 / DX6i / Phoenix / Blade CX2 / mCX / MSR
    Proud Owner of 2 Eddie Gold stars

    Comment


    • #32
      Originally posted by heliTV View Post
      Sounds like you're well on the way to being addicted!
      Not the only one, eh
      Phil OB3
      Trex 450SE v2

      Walkera 4#3b
      DX6i
      Phoenix


      http://stratfordgliding.co.uk/

      ...and proud owner of THREE!

      Comment


      • #33
        yes youre right I will be buying more batteries soon, I have already charged it 8 times today
        One battery just isn't enough

        BTW when the charger light stays on even though you have removed the lipo its time to replace the charger batteries. I only got 8 charges out of the stock ones, but if you stick a decent set in they should last a while.
        Dave

        sigpic Proud holder of 3 EGS

        Comment


        • #34
          Originally posted by Boggy View Post
          if you still have the lama here is a quick set up guide to get it flying right.
          to start hover the heli.
          looking from the tail of the heli
          if it drifts sideways.and the trim is not enough to control it. centre the trim....pop off the ball link on the left servo arm. if the heli is drifting right..shorten the rod(screw the loop on further). half a turn and retry hovering if its drifting left lengthen it.
          if the heli is drifting forward centre the trim pop off the right hand ball link and shorten the rod...backwards lengthen it.... remember half a turn at a time. be patient and you will get it hovering steady with no trim needed at all.

          now the tail. hover the heli it should now be in a nice steady hover if the tail drifts right with no input.. land the heli turn the proportion pot anti clockwise very slightly.left drift turn clockwise..then disconnect the battery..reconnect and re-hover. small adjustments be patient. once the tail doesn't drift...apply input to the rudder and release if the heli continues to turn slightly then slowly settles add gain. if it is reluctant to turn and wags reduce gain.( you can do this without disconnecting each time)

          try this mate its copied and pasted from an earlier thread i did

          try the fms flight sim then think about phoenix fs its light years ahead
          __________________
          Ron

          Thanks, Boggy, I've only just come across this. Superb concise setup.
          Brian


          More enthusiasm than skill

          And proud recipient of 3x sigpic

          Comment


          • #35
            the trex 250 is a pretty good cp heli that is the size of a lama yet you can fly it outside and it can go inverted , only problem is though... cost...
            twister coastguard (cx2 shell , alloy upgrades) - regretably written off

            35 mh radio ( with fms cable)

            6 ch 35 mh twister cp gold computer radio

            twister cp gold (brushless upgrade) - regretably written off

            phoenix sim
            very proud owner of an eddie gold star!
            sigpic

            Comment

            Working...
            X